info
Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss
Core Temp Mac Download
2 views
Skip to first unread message
Nena Postlewaite
Jan 25, 2024, 2:39:09 PMJan 25
to
What makes Core Temp unique is the way it works. It is capable of displaying a temperature of each individual core of every processor in your system. You can see temperature fluctuations in real time with varying workloads. Core Temp is also motherboard agnostic. Core Temp makes it easy for you to monitor the temperature of any modern x86 based processor. The program supports processors from all three major manufacturers; Intel, AMD and VIA.
The temperature readings are very accurate as the data is collected directly from a Digital Thermal Sensor (or DTS) which is located in each individual processing core*, near the hottest part. This sensor is digital, which means it doesn't rely on an external circuit located on the motherboard to report temperature, its value is stored in a special register in the processor so that software can access and read it. This eliminates any inaccuracies that can be introduced by external motherboard circuits and sensors.
core temp mac download
Download Zip https://t.co/4hCZO48OAN
I have Core Temp and Asus AI Suite II. Core Temp says my CPU temps are around 20 degrees and the AI Suite says mt temps are around 38 degrees. That seems to be a major difference. Which is correct? My CPU is an AMD FX-8350.
While encoding my temperatures go up to 70-74c (depends on room temp. this is for 30+), while maximum i reached (on purpose, with Auto/overvolting) is 80c for both CPU socket and VRM's, at that point, motherboard started to throttle CPU freq and voltage, and continued to run without problems at solid 80c (with variations to 79c, and without spike to 81c).
Yep, you are good :). But, you cna count at 10c more from Prime95 test or encoding, so socket max would be at 60-65c, and that is still great. Monitor core temps also, theya re usually lower then socket.
It's not true that max core temp. for AMD CPU's is 61c. My CPu have max core temp of 70c (or 72c, while CoreTemp program suggest it is 80c), while i successfully did go up to 80c without single problem (apart from heat in the room).
In my case the socket temp is a big chunk higher than the core(s) temperature(s). I think that's more a testament to good thermal paste/heat dissipation, than a sensor flaw, but I'm not sure on that one.
To make sure your software is giving you an accurate reading you could compare the results with those of another temperature monitoring application. There are several free lightweight tools to monitor your CPU temperature, one of which is Core Temp.
It would be advisable to check your heat sink to see if it has been dislodged, or that the thermal paste is still connecting the heat sink to the CPU, as running your CPU at that temp is sure to cause damage in the long run.
You're well into the range that can cause permanent damage to the CPU. Most consumer electronics (including CPUs) are not designed to operate above 85 C for any extended period of time, and most will actually shut down when they get over about 100-105 C. Provided you have a working (and properly sized) cooling system and are not somewhere with unusually high temperatures to begin with (40 C or higher), you should not be seeing temperatures that high no matter how hard you push the CPU.
However, I'm inclined to believe something is wrong with your system due to that insane discrepancy between reported package and core temperatures. In particular, the possibilities that come to mind are:
CPU core temperatures of more than 110 degrees is too high and make the processor stop working. If really temp is over 110 degrees system will likely crash and there could be nasty situation. HWMonitor is showing incorrect values.
Go to your BIOS and check temperatures there, and if BIOS also says nothing this could be indicative that your Motherboard dosen't have any temperature sensors, thus explaining why HWMonitor is showing strange values.
Your CPU temperature is reaching its very maximum. I think, any PC component having temperature over 100C is too much for extended period of time. It is recommended to keep it under 80C in the long run, 60-something is even better.
The iGPU (Radeon R6) temp of 66C appears to be much more believable. Since this matches the "Package Temp" then I would surmise that your actual temp is 66C since the CPU cores and iGPU are in the same housing.
Given the fact that your cores are all running well above the stock 1900 MHz and one of them running near the max 3200 MHz turbo, it tells me that the temperatures are not affecting performance. If you're temperatures were too high then your CPU would throttle down to prevent damage.
You can download other temp monitoring software and see if you get similar results. Also, if your BIOS reports temps then you should check temps in your BIOS since that should be the most accurate reading.
Although it's generally not an ideal temperature for a computer, but if the temperature stays while you do simple working and light or mid high works in your computer then it can be your cooling system. Which is failing!
The CORE sensor measures both core body temperature and skin temperature. Those metrics are displayed live in the CORE app and on compatible sports tech devices. The app and some Garmin devices also display the real-time Heat Strain Index, which shows the amount of heat stress the body is experiencing.
Heat training adapts the body to perform more efficiently at elevated core temperatures. It also builds blood plasma and hemoglobin, which increases performance (increased power at both lactate threshold and VO2max) in both cool and hot conditions alike.
To get the most precise data during sports activity, we highly recommend pairing with a heart rate monitor. Heart rate helps the sensor accurately convert measured heat flux into core body temperature. During everyday activity (ie. non-sports), core temperature data is accurate both with and without a heart rate monitor.
And--not that this would be easy--I'm running a Conky desktop on a TFT that's attached to my Raspi 3 which automagically gives me the load on the four cores which are in it. This appears to be the underlying code which reports the CPU load of each core.
I write about physiology and endurance training optimisation.
I'm an Exercise Physiology PhD student, Physiotherapist, and endurance coach / consultant.
I try to integrate ideas from the perspectives of an athlete, performance specialist, clinician, researcher, and especially as a curious enthusiast who just wants to learn from the smartest people in whatever room I find myself in.
Everything written is my own inexpert opinion. Any good ideas should be attributed to the many smart people I have learned from. Any bad ideas are due to my own temporary misunderstanding. My current opinions will most certainly change as I continue to learn. Nothing written constitutes professional advice.
Core Temp is one of the simplest programs that gives you access to real-time information about your processor. With it, you can see which processor your computer uses, as well as information about the socket, the frequency of each core, the multipler, the load, and the temperature. You can also see the lithography it was designed with, as well as the resources it's consuming at all times.
One of the features that makes Core Temp an excellent program is that, by default, it shows the temperature of each processor core in the task bar. In the program settings, you can determine what temperature to display there, such as the highest temperature recorded by any of the cores. That way, you can know the maximum temperature of the processor. You can also check data such as processor frequency, load, RAM usage, and resource consumption, all at a glance.
The program is compatible with Intel and AMD processors and accurately logs each core's information. You can also change the update frequency in milliseconds for each bit of data. Finally, you can activate alerts for whenever a certain temperature is exceeded.
Creation of a script that gets the temperature is required. The cputemp plugin by default does not support my Ryzen 3600. Here is how you can customize the plugin to work with the Ryzen. This will most likely not work work with other chips. You will need to ask for support on the forum to write a custom cpu-temp script for your system.
When I stress my not overclocked i7-7700k by CPU-Z software it gets 65 deg C max. However when I run P3D v4.1 it has around 80-85 (peak) deg C during whole flight.
It's still below safe temp of 100 deg C but in spite of all I think it's too high.
When I overclocked it to 4.9 GHz I've noticed that the temperature increased to 90-95 (peak) deg C. I think I should consider better cooler for sure, however on the other hand I read some articles with the conclusion that i7-7700k has the well-known overheating issue.
7700k OCd to 4.8, HT is on. I have a cheap H55 cooler but I replaced the fan with a Noctau A14 3000 industrial and set a profile to wind out the fan as temps rise. It can get a bit noisy when simming, but my speakers are drown out the fan and temps never exceed 75C.
f5d0e4f075
The temperature readings are very accurate as the data is collected directly from a Digital Thermal Sensor (or DTS) which is located in each individual processing core*, near the hottest part. This sensor is digital, which means it doesn't rely on an external circuit located on the motherboard to report temperature, its value is stored in a special register in the processor so that software can access and read it. This eliminates any inaccuracies that can be introduced by external motherboard circuits and sensors.
core temp mac download
Download Zip https://t.co/4hCZO48OAN
I have Core Temp and Asus AI Suite II. Core Temp says my CPU temps are around 20 degrees and the AI Suite says mt temps are around 38 degrees. That seems to be a major difference. Which is correct? My CPU is an AMD FX-8350.
While encoding my temperatures go up to 70-74c (depends on room temp. this is for 30+), while maximum i reached (on purpose, with Auto/overvolting) is 80c for both CPU socket and VRM's, at that point, motherboard started to throttle CPU freq and voltage, and continued to run without problems at solid 80c (with variations to 79c, and without spike to 81c).
Yep, you are good :). But, you cna count at 10c more from Prime95 test or encoding, so socket max would be at 60-65c, and that is still great. Monitor core temps also, theya re usually lower then socket.
It's not true that max core temp. for AMD CPU's is 61c. My CPu have max core temp of 70c (or 72c, while CoreTemp program suggest it is 80c), while i successfully did go up to 80c without single problem (apart from heat in the room).
In my case the socket temp is a big chunk higher than the core(s) temperature(s). I think that's more a testament to good thermal paste/heat dissipation, than a sensor flaw, but I'm not sure on that one.
To make sure your software is giving you an accurate reading you could compare the results with those of another temperature monitoring application. There are several free lightweight tools to monitor your CPU temperature, one of which is Core Temp.
It would be advisable to check your heat sink to see if it has been dislodged, or that the thermal paste is still connecting the heat sink to the CPU, as running your CPU at that temp is sure to cause damage in the long run.
You're well into the range that can cause permanent damage to the CPU. Most consumer electronics (including CPUs) are not designed to operate above 85 C for any extended period of time, and most will actually shut down when they get over about 100-105 C. Provided you have a working (and properly sized) cooling system and are not somewhere with unusually high temperatures to begin with (40 C or higher), you should not be seeing temperatures that high no matter how hard you push the CPU.
However, I'm inclined to believe something is wrong with your system due to that insane discrepancy between reported package and core temperatures. In particular, the possibilities that come to mind are:
CPU core temperatures of more than 110 degrees is too high and make the processor stop working. If really temp is over 110 degrees system will likely crash and there could be nasty situation. HWMonitor is showing incorrect values.
Go to your BIOS and check temperatures there, and if BIOS also says nothing this could be indicative that your Motherboard dosen't have any temperature sensors, thus explaining why HWMonitor is showing strange values.
Your CPU temperature is reaching its very maximum. I think, any PC component having temperature over 100C is too much for extended period of time. It is recommended to keep it under 80C in the long run, 60-something is even better.
The iGPU (Radeon R6) temp of 66C appears to be much more believable. Since this matches the "Package Temp" then I would surmise that your actual temp is 66C since the CPU cores and iGPU are in the same housing.
Given the fact that your cores are all running well above the stock 1900 MHz and one of them running near the max 3200 MHz turbo, it tells me that the temperatures are not affecting performance. If you're temperatures were too high then your CPU would throttle down to prevent damage.
You can download other temp monitoring software and see if you get similar results. Also, if your BIOS reports temps then you should check temps in your BIOS since that should be the most accurate reading.
Although it's generally not an ideal temperature for a computer, but if the temperature stays while you do simple working and light or mid high works in your computer then it can be your cooling system. Which is failing!
The CORE sensor measures both core body temperature and skin temperature. Those metrics are displayed live in the CORE app and on compatible sports tech devices. The app and some Garmin devices also display the real-time Heat Strain Index, which shows the amount of heat stress the body is experiencing.
Heat training adapts the body to perform more efficiently at elevated core temperatures. It also builds blood plasma and hemoglobin, which increases performance (increased power at both lactate threshold and VO2max) in both cool and hot conditions alike.
To get the most precise data during sports activity, we highly recommend pairing with a heart rate monitor. Heart rate helps the sensor accurately convert measured heat flux into core body temperature. During everyday activity (ie. non-sports), core temperature data is accurate both with and without a heart rate monitor.
And--not that this would be easy--I'm running a Conky desktop on a TFT that's attached to my Raspi 3 which automagically gives me the load on the four cores which are in it. This appears to be the underlying code which reports the CPU load of each core.
I write about physiology and endurance training optimisation.
I'm an Exercise Physiology PhD student, Physiotherapist, and endurance coach / consultant.
I try to integrate ideas from the perspectives of an athlete, performance specialist, clinician, researcher, and especially as a curious enthusiast who just wants to learn from the smartest people in whatever room I find myself in.
Everything written is my own inexpert opinion. Any good ideas should be attributed to the many smart people I have learned from. Any bad ideas are due to my own temporary misunderstanding. My current opinions will most certainly change as I continue to learn. Nothing written constitutes professional advice.
Core Temp is one of the simplest programs that gives you access to real-time information about your processor. With it, you can see which processor your computer uses, as well as information about the socket, the frequency of each core, the multipler, the load, and the temperature. You can also see the lithography it was designed with, as well as the resources it's consuming at all times.
One of the features that makes Core Temp an excellent program is that, by default, it shows the temperature of each processor core in the task bar. In the program settings, you can determine what temperature to display there, such as the highest temperature recorded by any of the cores. That way, you can know the maximum temperature of the processor. You can also check data such as processor frequency, load, RAM usage, and resource consumption, all at a glance.
The program is compatible with Intel and AMD processors and accurately logs each core's information. You can also change the update frequency in milliseconds for each bit of data. Finally, you can activate alerts for whenever a certain temperature is exceeded.
Creation of a script that gets the temperature is required. The cputemp plugin by default does not support my Ryzen 3600. Here is how you can customize the plugin to work with the Ryzen. This will most likely not work work with other chips. You will need to ask for support on the forum to write a custom cpu-temp script for your system.
When I stress my not overclocked i7-7700k by CPU-Z software it gets 65 deg C max. However when I run P3D v4.1 it has around 80-85 (peak) deg C during whole flight.
It's still below safe temp of 100 deg C but in spite of all I think it's too high.
When I overclocked it to 4.9 GHz I've noticed that the temperature increased to 90-95 (peak) deg C. I think I should consider better cooler for sure, however on the other hand I read some articles with the conclusion that i7-7700k has the well-known overheating issue.
7700k OCd to 4.8, HT is on. I have a cheap H55 cooler but I replaced the fan with a Noctau A14 3000 industrial and set a profile to wind out the fan as temps rise. It can get a bit noisy when simming, but my speakers are drown out the fan and temps never exceed 75C.
f5d0e4f075
0 new messages