Something in my WinXP setup causes this to pop up when
new hardware is added.
Help!
~Ike
Suggestion?
(Thanks for responding!)
[2004/02/03 13:37:13 520.3 Driver Install]
#-019 Searching for hardware ID(s):
usb\vid_1606&pid_0030&rev_0100,usb\vid_1606&pid_0030
#-018 Searching for compatible ID(s):
usb\class_00&subclass_00&prot_00,usb\class_00&subclass_00,
usb\class_00
#-198 Command line processed: C:\WINDOWS\system32
\services.exe
#I022 Found "USB\VID_1606&PID_0030" in
C:\WINDOWS\inf\umax.inf; Device: "UMAX Astra
2000U"; Driver: "UMAX Astra 2000U";
Provider: "Microsoft"; Mfg: "UMAX DATA SYSTEMS INC.";
Section name: "USB.Astra1220U.Scanner".
#I023 Actual install section: [USB.Astra1220U.Scanner].
Rank: 0x00000001. Effective driver date:
07/01/2001.
#-166 Device install function: DIF_SELECTBESTCOMPATDRV.
#I063 Selected driver installs from section
[USB.Astra1220U.Scanner] in "c:\windows\inf\umax.inf".
#I320 Class GUID of device remains: {6BDD1FC6-810F-11D0-
BEC7-08002BE2092F}.
#I060 Set selected driver.
#I058 Selected best compatible driver.
[2004/02/03 13:37:15 520.5]
#-198 Command line processed: C:\WINDOWS\system32
\services.exe
#I140 Installing device class: "Image" {6bdd1fc6-810f-
11d0-bec7-08002be2092f}.
#E067 Could not locate section [ClassInstall32].
#E142 Class: {6BDD1FC6-810F-11D0-BEC7-08002BE2092F}.
Install failed. Error 0xe0000101: The required section
was not found in the INF.
Sorry, can't give you a solution. I looked through my setupi.log and
found that the same "Image" was loaded when I setup windows:-
> #-199 Executing "C:\WINDOWS\system32\setup.exe" with command line: setup -newsetup
> #I140 Installing device class: "Image" {6bdd1fc6-810f-11d0-bec7-08002be2092f}.
> #I141 Class install completed with no errors.
I have a USB digital camera that loaded to the same 6bdd1fc6... code
using an inf file that had a commented out [ClassInstall32] section - so
it worked for me without that section. It never tried to load class
"Image" again.
Only suggestion I have is to do a repair install of XP and see if the
setup will load that class correctly with the scanner connected.