EWFmgr Cannot find EWF partition
Tony Guan
The fbalog.txt (at the bottom of this post) indicates that EWF partition has
been successfully created on the 2nd partition on my disk, but when I run
ewfmgr, it consistantly report no EWF partition found.
Could anyone give me some clue? I have been hangering on EWF for weeks and
at the egde of being crazy.
SOS!
Tony Guan
12:23:50 PM - [FBASetProgressText] Initializing...
12:23:50 PM - [CallEntryPointThread] C:\WINDOWS\FBA\FBALIB.DLL,
FBAInitialize
12:23:50 PM - [FBASetProgressText] Setting SystemPrefix...
12:23:50 PM - [FBASetProductKey] Evaluation product key
12:25:35 PM - ConfigureEwf() Start.
12:25:35 PM - Getting EWF config parameters from registry.
12:25:35 PM - Non El Torito disk configuration.
12:25:35 PM - EWF Partition Size = 500 (KBytes), Levels = 1, Volumes = 1.
12:25:35 PM - Protected Volume Config #0 :
12:25:35 PM - Disk= 0,Part= 1,DiskType= IDE,Type= RAM.
12:25:35 PM - Enable= Disabled, Optimize= 0, LazyWrite= N.
12:25:35 PM - Found 2 Hard Disks.
12:25:35 PM - Disk #0 layout info:
12:25:35 PM - PRIMARY partition,start=0x0000000000007e00,
len=0x0000000019006800, type= 6
12:25:35 PM - FREE partition,start=0x000000001900e600,
len=0x0000000249605400, type= 0
12:25:35 PM - Allocating EWF in PRIMARY partition,
start=0x000000001900e600, len=0x000000000000fc00.
12:25:35 PM - Created EWF partition on Disk = 0, partition = 2,size =
0x000000000000fc00 .
12:25:35 PM - Saving EWF configuration to registry:
12:25:35 PM - Protected Volume ArcName =
multi(0)disk(0)rdisk(0)partition(1).
12:25:35 PM - ewfOpen.
12:25:35 PM - EWF Volume Config on Disk#0, Partition#2:
12:25:35 PM - Segments = 0, Max Volumes = 1, Max Levels = 1
12:25:35 PM - ewfAdd.
12:25:35 PM - Protected Volume Config on Disk0\Partition1 :
12:25:35 PM - Type = RAM, State= DISABLED.
12:25:35 PM - ewfClose
12:25:35 PM - ConfigureEwf() End, status = 0x0.
12:25:36 PM - [CallEntryPointThread] C:\WINDOWS\system32\ewfdll.dll,
ConfigureEwf
12:25:36 PM - [FBASetProgressText] Resetting Setup Flag...
12:25:36 PM - [FBADoReboot] Sleeping...
12:25:46 PM - [FBADoReboot] Rebooting system...
C:\WINDOWS\FBA>ewfmgr
Unable to find an Ewf volume.
C:\WINDOWS\FBA>ewfmgr c: -enable
Failed getting protected volume configuration with error 1.
Tony Guan
Thanks!!
"Tony Guan" <gua...@ficsh.dns2go.com> 写入消息新闻
:#uRhsIvJCHA.1724@tkmsftngp08...
Denys Meung
disks. The FBALOG.TXT reports only Disk#0. To isolate the problem, do this
in a simple way by physically removing the second disk, then partition your
Disk#0 according to the "EWF" threads on 7/3/02. Once EWF is working, you
can re-attach your second drive. Check your jumper settings!
Denys-
"Tony Guan" <gua...@ficsh.dns2go.com> wrote in message
news:OoLQzOvJCHA.2404@tkmsftngp11...
Tony Guan
But problem still remains. The reason fba reports 1 disk is it already can
create
EWF partition on the first one. Here is the fbalog.txt when I remove the
other disk.
12:09:12 PM - ConfigureEwf() Start.
12:09:12 PM - Getting EWF config parameters from registry.
12:09:12 PM - Non El Torito disk configuration.
12:09:12 PM - EWF Partition Size = 400000 (KBytes), Levels = 1, Volumes =
1.
12:09:12 PM - Protected Volume Config #0 :
12:09:12 PM - Disk= 0,Part= 1,DiskType= IDE,Type= RAM.
12:09:12 PM - Enable= Enabled, Optimize= 0, LazyWrite= N.
12:09:12 PM - Found 1 Hard Disks.
12:09:12 PM - Deleting EWF Partition #3, disk#=0, type=69
12:09:13 PM - Disk #0 layout info:
12:09:13 PM - PRIMARY partition,start=0x0000000000007e00,
len=0x0000000019006800, type= 11
12:09:13 PM - PRIMARY partition,start=0x000000001901e200,
len=0x00000001384b7e00, type= 11
12:09:13 PM - FREE partition,start=0x000000001900e600,
len=0x000000000000fc00, type= 0
12:09:13 PM - FREE partition,start=0x00000001514d6000,
len=0x000000011113da00, type= 0
12:09:13 PM - Allocating EWF in PRIMARY partition,
start=0x000000001900e600, len=0x000000000000fc00.
12:09:13 PM - Created EWF partition on Disk = 0, partition = 3,size =
0x000000000000fc00 .
12:09:13 PM - Saving EWF configuration to registry:
12:09:13 PM - Protected Volume ArcName =
multi(0)disk(0)rdisk(0)partition(1).
12:09:13 PM - ewfOpen.
12:09:13 PM - EWF Volume Config on Disk#0, Partition#3:
12:09:13 PM - Segments = 0, Max Volumes = 1, Max Levels = 1
12:09:13 PM - ewfAdd.
12:09:13 PM - Protected Volume Config on Disk0\Partition1 :
12:09:13 PM - Type = RAM, State= ENABLED.
12:09:13 PM - ewfClose
12:09:13 PM - ConfigureEwf() End, status = 0x0.
12:09:13 PM - [CallEntryPointThread] C:\WINDOWS\system32\ewfdll.dll,
ConfigureEwf
:09:13 PM - [FBASetProgressText] Resetting Setup Flag...
12:09:13 PM - [FBADoReboot] Sleeping...
12:09:23 PM - [FBADoReboot] Rebooting system...
"Denys Meung" <denys...@vibren.com> 写入消息新闻
:Ov8#Ra0JCHA.2448@tkmsftngp11...
Denys Meung
notice:
1. You did not uncheck "Start EWF Enable," thus Enable = Enabled
2. Right below the "Found 1 Hard Disk," EWF was being deleted, and later in
the log
EWF was being created. Since the State = Enabled initially, EWF was not
sucessfully set but errors were not reported (my thought).
3. For EWF Partition Size in KBytes," you can just set it to 0, since you
are using RAM Overlay.
Check your "Enhanced Write Filter" Settings and try it again.
Denys-
"Tony Guan" <gua...@ficsh.dns2go.com> wrote in message
news:eDzmci7JCHA.2568@tkmsftngp09...
Tony Guan
I made it sucessfully on another PC. I am still trying to find the reason.
As soon as I have the result, I will report it.
Thanks again!
"Denys Meung" <denys...@vibren.com> 写入消息新闻
:#P#Z88AKCHA.212@tkmsftngp12...
Tony Guan
In my configuration, "PnP (User-mode) " is not included, which makes the
image fail to function EWF.
Thanks to God! My weeks of work finally paid off!
"Tony Guan" <guanx...@hotmail.com> 写入消息新闻
:OpUWDNIKCHA.2520@tkmsftngp08...