Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss
Target designer - Explorer does not show usb devices plugged/unplu
2 views
Skip to first unread message
Mr Garbage
Nov 9, 2009, 5:10:04 PM11/9/09
to
I am using Target Designer to build my own XP. This system boots to a dos
shell from which I can then run explorer and do what I need to do. If I have
explorer running and plug in a USB flash stick, Explorer does not see the new
drive. Only if I start a new instance of Explorer does it appear. If I run
Device Manager however it does show devices as they are plugged in and
removed.
shell from which I can then run explorer and do what I need to do. If I have
explorer running and plug in a USB flash stick, Explorer does not see the new
drive. Only if I start a new instance of Explorer does it appear. If I run
Device Manager however it does show devices as they are plugged in and
removed.
Am I missing some component(s) in my build? I have all the PNP and Plug and
Play Monitor and Plug and Play Software Device Enumerator as part of my build.
Thank you
Max
Nov 10, 2009, 6:12:08 AM11/10/09
to
I had a similar problem
try starting explorer a little after you connect the usb device.
try starting explorer a little after you connect the usb device.
Max
"Mr Garbage" <MrGa...@discussions.microsoft.com> ha scritto nel messaggio
news:CF67E624-A089-43EF...@microsoft.com...
Max
Nov 10, 2009, 6:15:08 AM11/10/09
to
ops, not read completely the post when I answered ;p
Same issue but for me was not a problem to start explorer once I have
inserted the usb key.
Max
"Mr Garbage" <MrGa...@discussions.microsoft.com> ha scritto nel messaggio
news:CF67E624-A089-43EF...@microsoft.com...
0 new messages