Files required ... no longer registered...
Carl
Files required to use Windows Update are no longer registered or installed
on your computer.
I tried letting it do the:
Register or reinstall the files for me now (Recommended)
but I still get the same result.
I also tried the following batch file:
cd /d %SystemRoot%\system32
regsvr32 comcat.dll /s
regsvr32 shdoc401.dll /s
regsvr32 shdoc401.dll /i /s
regsvr32 asctrls.ocx /s
regsvr32 oleaut32.dll /s
regsvr32 shdocvw.dll /I /s
regsvr32 shdocvw.dll /s
regsvr32 browseui.dll /s
regsvr32 browseui.dll /I /s
regsvr32 msrating.dll /s
regsvr32 mlang.dll /s
regsvr32 hlink.dll /s
regsvr32 mshtmled.dll /s
regsvr32 urlmon.dll /s
regsvr32 plugin.ocx /s
regsvr32 sendmail.dll /s
regsvr32 scrobj.dll /s
regsvr32 mmefxe.ocx /s
regsvr32 corpol.dll /s
regsvr32 jscript.dll /s
regsvr32 msxml.dll /s
regsvr32 imgutil.dll /s
regsvr32 thumbvw.dll /s
regsvr32 cryptext.dll /s
regsvr32 rsabase.dll /s
regsvr32 inseng.dll /s
regsvr32 iesetup.dll /i /s
regsvr32 cryptdlg.dll /s
regsvr32 actxprxy.dll /s
regsvr32 dispex.dll /s
regsvr32 occache.dll /s
regsvr32 occache.dll /i /s
regsvr32 iepeers.dll /s
regsvr32 urlmon.dll /i /s
regsvr32 cdfview.dll /s
regsvr32 webcheck.dll /s
regsvr32 mobsync.dll /s
regsvr32 pngfilt.dll /s
regsvr32 licmgr10.dll /s
regsvr32 icmfilter.dll /s
regsvr32 hhctrl.ocx /s
regsvr32 inetcfg.dll /s
regsvr32 tdc.ocx /s
regsvr32 MSR2C.DLL /s
regsvr32 msident.dll /s
regsvr32 msieftp.dll /s
regsvr32 xmsconf.ocx /s
regsvr32 ils.dll /s
regsvr32 msoeacct.dll /s
regsvr32 inetcomm.dll /s
regsvr32 msdxm.ocx /s
regsvr32 dxmasf.dll /s
regsvr32 l3codecx.ax /s
regsvr32 acelpdec.ax /s
regsvr32 mpg4ds32.ax /s
regsvr32 voxmsdec.ax /s
regsvr32 danim.dll /s
regsvr32 Daxctle.ocx /s
regsvr32 lmrt.dll /s
regsvr32 datime.dll /s
regsvr32 dxtrans.dll /s
regsvr32 dxtmsft.dll /s
regsvr32 WEBPOST.DLL /s
regsvr32 WPWIZDLL.DLL /s
regsvr32 POSTWPP.DLL /s
regsvr32 CRSWPP.DLL /s
regsvr32 FTPWPP.DLL /s
regsvr32 FPWPP.DLL /s
regsvr32 WUAPI.DLL /s
regsvr32 WUAUENG.DLL /s
regsvr32 ATL.DLL /s
regsvr32 WUCLTUI.DLL /s
regsvr32 WUPS.DLL /s
regsvr32 WUWEB.DLL /s
regsvr32 wshom.ocx /s
regsvr32 wshext.dll /s
regsvr32 vbscript.dll /s
regsvr32 scrrun.dll mstinit.exe /setup /s
regsvr32 msnsspc.dll /SspcCreateSspiReg /s
regsvr32 msapsspc.dll /SspcCreateSspiReg /s
exit
which said it was successfull but didn't help, and I tried:
%windir%\system32\regsvr32.exe %windir%\system32\MSXML3.DLL
which also said it was successful but didn't help.
I can even start BITS manually, but I still get the same message when
I try to do a windows update.
What do I try now?
have the same problem and can't fix it@discussions.microsoft.com I have the same problem and can't fix it
TaurArian [MVP]
1. Click Start.
2. Choose Run.
3. In the Run box, type (pressing okay after each one) :-
regsvr32 wuapi.dll
regsvr32 wuaueng.dll
regsvr32 wuaueng1.dll
regsvr32 wuauserv.dll
regsvr32 wucltui.dll
regsvr32 wups.dll
regsvr32 wuweb.dll
You may have to re-install Windows Update files
http://download.windowsupdate.com/v6/windowsupdate/redist/standalone/WindowsUpdateAgent20-x86.exe
Note If you have an x64-based computer, visit the following Microsoft Web site:
http://download.windowsupdate.com/v6/windowsupdate/redist/standalone/WindowsUpdateAgent20-x64.exe
Click Save in the File Download-Security Warning dialog box, and then select the
location where you want to save the file.
Double-click the file that you saved
NB - A note from Torgeir Bakken [MVP]
Note that if it says "Install is not needed since Windows Update Agent is already
installed.", run the exe with the command line switch /wuforce, like this:
WindowsUpdateAgent20-x86.exe /wuforce
"Carl" <Ca...@discussions.microsoft.com> wrote in message
news:0632232B-4941-45DA...@microsoft.com...
Carl
wuauserv.dll was loaded, but the DllRegisterServer entry point was not
found. This file can not be registered.
So I skipped ahead and followed your instructions for reinstalling windows
update (and I had to use the /wuforce switch)
I tried doing an update right after the install completed but it still gave
me the same error.
Then I tried to register wuauserv.dll again and got the same message.
TaurArian [MVP]
Repeat for the following:
regsvr32 wuapi.dll
regsvr32 wups.dll
regsvr32 wuaueng.dll
regsvr32 wuaueng1.dll
regsvr32 wucltui.dll
regsvr32 wuweb.dll
regsvr32 MSXML3.dll
net start wuauserv
"Carl" <Ca...@discussions.microsoft.com> wrote in message
news:2190192A-722D-414E...@microsoft.com...
Carl
Everything said it succeeded when I did as suggested, but when I tried to do
a Windows update afterward it still gave me the same failure message about
files required. I even tried a reboot then tried windows update after the
reboot, but still the same thing.
I have the same problem and can''t fix i
Windoctor tells me that there are a number of dll's missing but it actuall
looks like they are for other programs. -- Clark
Phil
registered....
I have reinstalled Windows Update from the link below but I still get
the same message at the Windows Update site. I have not created the
batch file as I have got a bit lost with the various replies on here,
particularly the 'net stop wuauserv' bit etc.
Could you please clarify the best way for me to proceed.
Is there anyone reading this who has managed to get Windows Update
working again?
Many thanks.
In article <#E44jsx0...@TK2MSFTNGP12.phx.gbl>, "TaurArian [MVP]"
<taurarian...@hotmail.com> writes
TaurArian [MVP]
Some have reported that simply re-registering the MSXML3.DLL seems to fix the
problem.
1. Click Start.
2. Choose Run.
3. In the Run box, type: regsvr32 MSXML3.DLL
Press okay
"Phil" <ph...@antispamburppmountjoy.com> wrote in message
news:Jd82IUCS...@antispamburp.com...
Phil
Phil
In article <O#AEloi1F...@TK2MSFTNGP15.phx.gbl>, "TaurArian [MVP]"
George Malamas
Thank You.