Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss
DM8148 WINEC7 boot up issue
14 views
Skip to first unread message
sharon
Jun 20, 2012, 7:54:44 AM6/20/12
to
Hello,
I am trying to boot WINEC7 on DM8148 custom board(though it is similar to
EVM8148,only some parts have been additional to this board,rest of the parts
have been retained has it is).
Initially the LINUX image was booting fine with the binaries downloaded by
EZSDK, i tried running GEL file through CCS on to the DM8148 custom board,after
the complete initialization of the gel file, now i am not able to boot through
SD card.
I have a question ,while loading GEL file did i corrupt the Boot ROM code from
which it is failing to detect the SD card boot switch settings.
If i have corrupted the Boot ROM code, how can i set it to default state.
I am trying to boot WINEC7 on DM8148 custom board(though it is similar to
EVM8148,only some parts have been additional to this board,rest of the parts
have been retained has it is).
Initially the LINUX image was booting fine with the binaries downloaded by
EZSDK, i tried running GEL file through CCS on to the DM8148 custom board,after
the complete initialization of the gel file, now i am not able to boot through
SD card.
I have a question ,while loading GEL file did i corrupt the Boot ROM code from
which it is failing to detect the SD card boot switch settings.
If i have corrupted the Boot ROM code, how can i set it to default state.
0 new messages