Problem:
I can not join my domain it says I don't have permission. I can't even share
any of the resources on my server. I can't get into my server because all of
my clients are on a workgroup.
Current setup:
My DSL modem/router/DHCP server connects to my switch. All my clients and 1
NIC on my server connect to the same switch. All computers including my
server have NIC's set to obtain IP automatically.
What I need to do:
I need to have access to shared drive on my SBS server so I can run backup
programs from my server to my clients.
Help:
I'm very new to SBS 2003. I know a bit about NT server but that doesn't help
much hear. I need simple step by step instructions on how to fix this.
--
Tbrox
Please post the ipconfig/all from the server and one from a client.
--
Regards,
Marina
Microsoft SBS-MVP
One of the Magical M&M's
"tbrox" <tb...@discussions.microsoft.com> schreef in bericht
news:211CC142-CD17-4789...@microsoft.com...
Go to http://www.smallbizserver.net/ and click on the network section
for some more details.
"tbrox" <tb...@discussions.microsoft.com> wrote:
Jim B. SBS MVP
Win IP config
Host name-------------------XP-Tom
Primanry DNS suffix--------:
Node type -------------------:unknown
IP routing Enabled-----------:no
Wins Proxy Enabled---------:no
DNS Suffix Search List -----:lan
Ethernet Adapter local area connection
connection specific DNS suffix-------:lan
Description ---------------------------:Marvell Yukon Gigabit
Physical Address
DHCP Enabled -----------------------:Yes
Autoconfig Endabled ----------------;Yes
IP Address----------------------------:192.168.1.118
Subnet--------------------------------:255.255.255.0
Default Gatway-----------------------:192.168.1.1
DHCP server--------------------------;192.168.1.1
DNS servers--------------------------:192.168.1.1
Server
Local Area Connection
connection specific DNS suffix-------:lan
Description ---------------------------:
Physical Address
DHCP Enabled -----------------------:Yes
Autoconfig Endabled ----------------;Yes
IP Address----------------------------:192.168.1.101
Subnet--------------------------------:255.255.255.0
Default Gatway-----------------------:192.168.1.1
DHCP server--------------------------;192.168.1.1
DNS servers--------------------------:192.168.1.1
Server Local Area connection
connection specific DNS suffix-------:lan
Description ---------------------------:Marvell Yukon Gigabit
Physical Address
DHCP Enabled -----------------------:Yes
Autoconfig Endabled ----------------;Yes
IP Address----------------------------:192.168.1.119
Subnet--------------------------------:255.255.255.0
Default Gatway-----------------------:192.168.1.1
DHCP server--------------------------;192.168.1.1
DNS servers--------------------------:192.168.1.1
Primary Wins------------------------:192.168.16.1
I hope this is enough info.
You servernics are in the same IP range and don't make any sense to me at
all. Check this out:
Smallbizserver.Net > Network > Two Nics, a static IP address, ISA, router:
http://www.smallbizserver.net/Default.aspx?tabid=52
--
Regards,
Marina
Microsoft SBS-MVP
One of the Magical M&M's
"tbrox" <tb...@discussions.microsoft.com> schreef in bericht
news:5AE2A203-2199-4591...@microsoft.com...
Thanks for the article it looked good and promising but here is where I had
problems with the article. Maybe you can shed some light on what I did wrong.
When I high lighted my internal NIC and went to Advanced and then Advanced
Settings all the settings for the Internal NIC were good however the External
NIC did not have an option to haveTCP/IP only without choosing a Protocol or
service.
then on Step C when I tried to open the DHCP service I get an error. First
I have to choose my Authorized DHCP Server something I didn't have to do
before and then when click on it in the left hand pane I get the error that
it can not find the DHCP server.
Any additonal helpful thougts would be appreciated.
Tbrox
You will want to set static IP's on your servernics. On the external nic,
check TCP/IP, then Advanced.
The servernics don't need DHCP, your clients will use that.
What is the DHCP scope? And how did you set your nics now? Is the DHCP
server service running?
--
Regards,
Marina
Microsoft SBS-MVP
One of the Magical M&M's
"tbrox" <tb...@discussions.microsoft.com> schreef in bericht
news:7F520B8E-BCDC-4757...@microsoft.com...