config files needed
pedro ramirez
can anyone help me with this, please, if there isn't any violations of
licence involved.
i need anyone to send me the mos standard available autoexec.bat,
config.sys win.ini and system.ini
why?
i have a compaq presario 660 system bought in the us. i have no win 3.x
disks. i'm in colombia south america. compaq here wouldn't give me any
support.
and:
i'm changing my system' mainboard, video card, from the compaq board
with video onboard to an aristo board and a trident video card, but i'm
not changing my win3.x hard disk. so the configuration files are full of
calls to compaq system files and windows 3.x can't start.
so i'm no expert and i don't know how many more changes to do on the
system files already mentioned (and needed)
so help.
thanks
pedro
--
pedro R.
To send me email/Para enviarme e-mail:
Replace 'nospam' for 'geocities'/Reemplace 'nospam' por 'geocities'
Jerry Lippey/MVP
hardware work without reinstalling it. If you want to try, you can get some help
from this article. Download WW0525.EXE from this web page:
http://support.microsoft.com/support/downloads/dp267.asp
("386 Enhanced Mode Problems")d-Party Information")
If you want to post your configuration files, some of us may recognize things
that you should remove.
--
-Jerry
pedro ramirez
---------------------autoexec.bat--------------------------------------
@SET PTDIR=C:\PRT4076\
LH /L:1,16944 C:\DOS\SHARE.EXE /L:500 /F:5100
LH /L:1,40352 C:\SCSI\MSCDEX.EXE /D:ASPICD0 /M:12
SET BLASTER=A220 I5 D1 H5 P330 T6
SET SOUND=C:\SB16
@LH /L:1,48048 C:\SB16\SB16SET /M:220 /VOC:220 /CD:220 /MIDI:220 /LINE:220 /TREBLE:0
C:\SB16\SBCONFIG.EXE /S
SET PATH=C:\CPQDOS;C:\;C:\DOS;c:\bat;C:\WINDOWS;C:\MOUSE;c:\winsock;
SET PATH=C:\PRT4076\;%PATH%
SET PROMPT=$p$g
rem SET TEMP=C:\WINDOWS\TEMP
C:\DOS\NLSFUNC C:\DOS\COUNTRY.SYS
C:\CPQDOS\MODE CON CP PREP=((850,437) C:\DOS\EGA.CPI)
C:\CPQDOS\MODE CON CP SEL=850
LH /L:1,18672 C:\CPQDOS\KEYB LA, 850, C:\CPQDOS\KEYBOARD.SYS
IF NOT EXIST C:\CPQDOS\SAVEDONE.CPQ CALL SAVEALL /A
LH /L:0 C:\DOS\SMARTDRV.EXE
C:\MOUSE\MOUSE.COM
C:\CPQDOS\MODE.COM CO80
C:\WINDOWS\WIN.com
--------------------------config.sys------------------------
DEVICE=C:\DOS\HIMEM.SYS
DEVICE=C:\DOS\EMM386.EXE NOEMS x=F000-F5FF X=C700-C7FF
BUFFERS=20,0
FILES=35
DOS=UMB
LASTDRIVE=E
FCBS=16,0
SHELL=C:\DOS\COMMAND.COM /P /E:1536
STACKS=9,256
DEVICEHIGH /L:1,19344 =C:\SCSI\ASPI2DOS.SYS /D /Z
DEVICEHIGH /L:1,30080 =C:\SCSI\ASPICD.SYS /D:ASPICD0
DOS=HIGH
DEVICEHIGH /L:1,16336 =C:\CPQDOS\DISPLAY.SYS CON=(,437,2)
COUNTRY=3,850,C:\DOS\COUNTRY.SYS
DEVICEHIGH /L:0 =C:\CPQDOS\POWER.EXE
-------------------------------win.ini----------------------------------
[windows]
spooler=yes
load=
run=
Beep=yes
NullPort=None
BorderWidth=3
CursorBlinkRate=640
DoubleClickSpeed=477
Programs=com exe bat pif
Documents=
DeviceNotSelectedTimeout=15
TransmissionRetryTimeout=45
KeyboardDelay=2
KeyboardSpeed=31
ScreenSaveActive=1
ScreenSaveTimeout=60
CoolSwitch=1
DosPrint=no
MouseThreshold1=4
MouseThreshold2=0
MouseSpeed=1
device=IBM 4076 ExecJet II Printer,IJ4076,LPT1:
[Desktop]
Pattern=(None)
GridGranularity=0
IconSpacing=75
WallPaper=marble.bmp
TileWallPaper=1
IconTitleWrap=1
[Extensions]
cal=calendar.exe ^.cal
crd=cardfile.exe ^.crd
trm=terminal.exe ^.trm
txt=notepad.exe ^.txt
ini=notepad.exe ^.ini
pcx=pbrush.exe ^.pcx
bmp=pbrush.exe ^.bmp
wri=write.exe ^.WRI
rec=recorder.exe ^.rec
hlp=winhelp.exe ^.hlp
qdi=c:\quickenw\qw.exe ^.qdt
qdt=c:\quickenw\qw.exe ^.qdt
qmt=c:\quickenw\qw.exe ^.qdt
qnx=c:\quickenw\qw.exe ^.qdt
qst=c:\quickenw\qw.exe ^.qdt
wps=C:\MSWORKS\msworks.exe ^.wps
wks=C:\MSWORKS\msworks.exe ^.wks
wdb=C:\MSWORKS\msworks.exe ^.wdb
wcm=C:\MSWORKS\msworks.exe ^.wcm
cce=C:\SISWIM\CCWIN.EXE ^.CCE
ccw=C:\SISWIM\CCWIN.EXE ^.CCW
cci=C:\SISWIM\CCWIN.EXE ^.CCI
alb=C:\SISWIM\PALBUM.EXE ^.ALB
LBR=C:\GORJYOV2\OMNIS7.EXE ^.LBR
BR=Omnis7.exe ^LBR
[intl]
sLanguage=enu
sCountry=Other Country
iCountry=1
iDate=0
iTime=1
iTLZero=0
iCurrency=0
iCurrDigits=2
iNegCurr=0
iLzero=0
iDigits=2
iMeasure=1
s1159=
s2359=
sCurrency=$
sThousand=,
sDecimal=.
sDate=/
sTime=:
sList=,
sShortDate=M/d/yy
sLongDate=dddd, MMMM dd, yyyy
[ports]
; A line with [filename].PRN followed by an equal sign causes
; [filename] to appear in the Control Panel's Printer Configuration dialog
; box. A printer connected to [filename] directs its output into this file.
LPT1:=
LPT2:=
LPT3:=
COM1:=9600,n,8,1,x
COM2:=19200,n,8,1,x
COM3:=19200,n,8,1,x
COM4:=19200,n,8,1,x
EPT:=
FILE:=
LPT1.DOS=
LPT2.DOS=
FAXPORT:=
[FontSubstitutes]
Helv=MS Sans Serif
Tms Rmn=MS Serif
Times=Times New Roman
Helvetica=Arial
[TrueType]
TTEnable=1
TTOnly=1
[mci extensions]
wav=waveaudio
mid=sequencer
rmi=sequencer
AVI=AVIVideo
MMM=MMMovie
[Compatibility]
NOTSHELL=0x0001
WPWINFIL=0x0006
CCMAIL=0x0008
AMIPRO=0x0010
REM=0x8022
PIXIE=0x0040
CP=0x0040
JW=0x42080
TME=0x0100
VB=0x0200
WIN2WRS=0x1210
PACKRAT=0x0800
VISION=0x0040
MCOURIER=0x0800
_BNOTES=0x24000
MILESV3=0x1000
PM4=0x2000
DESIGNER=0x2000
PLANNER=0x2000
DRAW=0x2000
WINSIM=0x2000
CHARISMA=0x2000
PR2=0x2000
PLUS=0x1000
ED=0x00010000
APORIA=0x0100
EXCEL=0x1000
GUIDE=0x1000
NETSET2=0x0100
W4GL=0x4000
W4GLR=0x4000
TURBOTAX=0x00080000
[Microsoft Word 2.0]
HPDSKJET=+1
[fonts]
Arial (TrueType)=ARIAL.FOT
Arial Bold (TrueType)=ARIALBD.FOT
Arial Bold Italic (TrueType)=ARIALBI.FOT
Arial Italic (TrueType)=ARIALI.FOT
Courier New (TrueType)=COUR.FOT
Courier New Bold (TrueType)=COURBD.FOT
Courier New Bold Italic (TrueType)=COURBI.FOT
Courier New Italic (TrueType)=COURI.FOT
Times New Roman (TrueType)=TIMES.FOT
Times New Roman Bold (TrueType)=TIMESBD.FOT
Times New Roman Bold Italic (TrueType)=TIMESBI.FOT
Times New Roman Italic (TrueType)=TIMESI.FOT
WingDings (TrueType)=WINGDING.FOT
MS Sans Serif 8,10,12,14,18,24 (VGA res)=SSERIFE.FON
Courier 10,12,15 (VGA res)=COURE.FON
MS Serif 8,10,12,14,18,24 (VGA res)=SERIFE.FON
Symbol 8,10,12,14,18,24 (VGA res)=SYMBOLE.FON
Roman (Plotter)=ROMAN.FON
Script (Plotter)=SCRIPT.FON
Small Fonts (VGA res)=SMALLE.FON
Symbol (TrueType)=SYMBOL.FOT
V1 Lucida Sans=v1sp.fon
V2 Lucida Sans=v2sp.fon
V3 Lucida Sans=v3sp.fon
V4 Lucida Sans=v4sp.fon
V5 Lucida Sans=v5sp.fon
V6 Lucida Sans=v6sp.fon
V7 Lucida Sans=v7sp.fon
KEYCAPS (TrueType)=C:\WINDOWS\SYSTEM\KEYCAPS.FOT
Stinger (TrueType)=C:\WINDOWS\SYSTEM\STINGER.FOT
Cricket Regular (TrueType)=C:\WINDOWS\SYSTEM\CRICKET.FOT
Dingbats1 (TrueType)=C:\WINDOWS\SYSTEM\DINGBAT1.FOT
Dingbats2 (TrueType)=C:\WINDOWS\SYSTEM\DINGBAT2.FOT
Formal Script (TrueType)=FORMLSCR.FOT
Letter Gothic (TrueType)=C:\WINDOWS\SYSTEM\LGOTH.FOT
Letter Gothic Bold (TrueType)=C:\WINDOWS\SYSTEM\LGOTHB.FOT
Letter Gothic Bold Italic (TrueType)=C:\WINDOWS\SYSTEM\LGOTHBI.FOT
Letter Gothic Italic (TrueType)=C:\WINDOWS\SYSTEM\LGOTHI.FOT
Luftwaffe Regular (TrueType)=C:\WINDOWS\SYSTEM\LUFTWAFF.FOT
Slalom (TrueType)=C:\WINDOWS\SYSTEM\SLALOM.FOT
Ultra Shadow (TrueType)=C:\WINDOWS\SYSTEM\ULTRASHD.FOT
Arena Black (TrueType)=ARENBLK.FOT
Aladdin Regular (TrueType)=C:\WINDOWS\SYSTEM\ALADDIN.FOT
Basset Regular (TrueType)=C:\WINDOWS\SYSTEM\BASSET.FOT
Bernadette Italic (TrueType)=C:\WINDOWS\SYSTEM\BERNDTI.FOT
Casque OpenFace (TrueType)=C:\WINDOWS\SYSTEM\CASQUEOF.FOT
Cocktail Italic (TrueType)=C:\WINDOWS\SYSTEM\COCKTLI.FOT
Amphion (TrueType)=C:\WINDOWS\SYSTEM\AMPHION.FOT
Boston Italic (TrueType)=C:\WINDOWS\SYSTEM\BOSTONI.FOT
Boston Bold Italic (TrueType)=C:\WINDOWS\SYSTEM\BOSTONBI.FOT
Boston Bold (TrueType)=C:\WINDOWS\SYSTEM\BOSTONB.FOT
Boston Regular (TrueType)=C:\WINDOWS\SYSTEM\BOSTON.FOT
Marquee Engraved (TrueType)=MARQUEEN.FOT
Jyotish (TrueType)=JYOTISH.FOT
Garamond (TrueType)=GARAMOND.FOT
Accujen 8,9,10,12,15,18 (VGA res)=Accujen.fon
Accumon 8,9,10,12,15,18 (VGA res)=Accumon.fon
Accushi 8,9,10,12,15,18 (VGA res)=Accushi.fon
Astro-SemiBold (TrueType)=ASTRO-SE.FOT
[embedding]
SoundRec=Sound,Sound,SoundRec.exe,picture
Package=Package,Package,packager.exe,picture
PBrush=Paintbrush Picture,Paintbrush Picture,pbrush.exe,picture
MSWorks.Sheet.3=Microsoft Works 3.0 Sheet or Chart,Microsoft Works 3.0 Sheet or
Chart,C:\MSWORKS\msworks.exe,pi
cture
MSWorksSpreadsheet=Microsoft Works Spreadsheet,Microsoft Works
Spreadsheet,C:\MSWORKS\msworks.exe,picture
MSWorksChart=Microsoft Works Chart,Microsoft Works
Chart,C:\MSWORKS\msworks.exe,picture
MS_ClipArt_Gallery=Microsoft ClipArt Gallery,Microsoft ClipArt
Gallery,C:\WINDOWS\MSAPPS\ARTGALRY\artgalry.exe,
picture
MSDraw=Microsoft Drawing,Microsoft
Drawing,C:\WINDOWS\MSAPPS\MSDRAW\msdraw.exe,picture
Note-It=Microsoft Note-It,Microsoft
Note-It,C:\WINDOWS\MSAPPS\NOTE-IT\note-it.exe,picture
MSWordArt.2=Microsoft WordArt 2.0,Microsoft WordArt
2.0,C:\WINDOWS\MSAPPS\WORDART\WordArt2.exe,picture
CrayolaArt=Crayola Artwork,Crayola Artwork,c:\crayola\studio.exe,picture
Soundo'LE=Soundo'LE,Soundo'LE,C:\SB16\WINAPPL\SOUNDOLE.EXE,picture
MMJBox=MIDI,MIDI,C:\SB16\WINAPPL\MMJBOX.EXE,picture
MPlayer=Media Clip,Media Clip,mplayer.exe,picture
NetscapeMarkup=Netscape Hypertext Document,Netscape Hypertext
Document,C:\NETSCAPE\NETSCAPE.EXE,picture
[Windows Help]
H_WindowPosition=[213,160,213,160,0]
M_WindowPosition=[161,0,478,471,0]
[ScreenSaver.Cpqblank]
videocheck=1
[CPQPoint]
UserID=User1
CPAutoSearch=QUESTION
AnsweredQ=0
ConfirmOnExit=0
SaveSettings=1
Window=129,221,195,119
ShowScore=1
ShowCases=0
main-state=0
default-font=-11,0,700,0,0,0,0,2,32,HELV
mdi-state=1
[MS User Info]
DefName=Araguana COMPAQ DirectPlus Customer
DefCompany=Compaq Computer Corporation
[MSAPPS]
MSAPPS=C:\WINDOWS\MSAPPS
TextConv=C:\WINDOWS\MSAPPS\TextConv
MSINFO=C:\WINDOWS\MSAPPS\MSINFO
ARTGALRY=C:\WINDOWS\MSAPPS\ARTGALRY
GRPHFLT=C:\WINDOWS\MSAPPS\GRPHFLT
MSDraw=C:\WINDOWS\MSAPPS\MSDraw
Note-It=C:\WINDOWS\MSAPPS\Note-It
WordArt=C:\WINDOWS\MSAPPS\WordArt
PROOF=C:\WINDOWS\MSAPPS\PROOF
[Microsoft System Info]
MSINFO=C:\WINDOWS\MSAPPS\MSINFO\MSINFO.EXE
[MM Works]
Path=D:\
[MS Proofing Tools]
Spelling
1033,0=C:\WINDOWS\MSAPPS\PROOF\msspel2.dll,C:\WINDOWS\MSAPPS\PROOF\mssp2_en.lex
Spelling
2057,0=C:\WINDOWS\MSAPPS\PROOF\msspel2.dll,C:\WINDOWS\MSAPPS\PROOF\mssp2_en.lex
Custom Dict 1=C:\WINDOWS\MSAPPS\PROOF\custom.dic
Spelling
1034,0=C:\WINDOWS\MSAPPS\PROOF\msspel2.dll,C:\WINDOWS\MSAPPS\PROOF\mssp2_es.lex
[MS Graphic Import Filters]
Windows Metafile (.WMF)=C:\WINDOWS\MSAPPS\GRPHFLT\wmfimp.flt,WMF
Computer Graphics Metafile(.CGM)=C:\WINDOWS\MSAPPS\GRPHFLT\cgmimp.flt,CGM
PC Paintbrush(.PCX)=C:\WINDOWS\MSAPPS\GRPHFLT\pcximp.flt,PCX
Tagged Image Format(.TIF)=C:\WINDOWS\MSAPPS\GRPHFLT\tiffimp.flt,TIF
[MS Text Converters]
MSWorks3Win=Works 3.0 for Windows, C:\WINDOWS\MSAPPS\TEXTCONV\wks3win.cnv,wps
MSWordWin2=Word for Windows 2.0, C:\WINDOWS\MSAPPS\TEXTCONV\wordwin2.cnv,doc
MSWord6=Microsoft Word 6.0, C:\WINDOWS\MSAPPS\TEXTCONV\msword6.cnv,doc
WrdPrfctDos50=WordPerfect 5.0, C:\WINDOWS\MSAPPS\TEXTCONV\WPFT5.CNV,doc
WrdPrfctDos=WordPerfect 5.1 for MS-DOS, C:\WINDOWS\MSAPPS\TEXTCONV\WPFT5.CNV,doc
WrdPrfctWin=WordPerfect 5.x for Windows, C:\WINDOWS\MSAPPS\TEXTCONV\WPFT5.CNV,doc
WrdPrfctDat=WordPerfect 5.1 or 5.2 Secondary File,
C:\WINDOWS\MSAPPS\TEXTCONV\WPFT5.CNV,doc
WrdPrfctDat50=WordPerfect 5.0 Secondary File,
C:\WINDOWS\MSAPPS\TEXTCONV\WPFT5.CNV,doc
Windows Write 3.0=Windows Write 3.0, C:\WINDOWS\MSAPPS\TEXTCONV\writwin.cnv,wri
MSWinWrite=Windows Write 3.1, C:\WINDOWS\MSAPPS\TEXTCONV\writwin.cnv,wri
WordWin2=Word 2.0 para Windows, C:\WINDOWS\MSAPPS\TEXTCONV\wordwin2.cnv,doc
MSWordDos=Word 5.x para MS-DOS, C:\WINDOWS\MSAPPS\TEXTCONV\worddos.cnv,doc
MSWordDos6=Word 6.0 para MS-DOS, C:\WINDOWS\MSAPPS\TEXTCONV\worddos.cnv,doc
[MS Setup (ACME) Table Files]
MSWOR...@v3.0.0.264 (US MM English OEM)=C:\MSWORKS\setup\setup.stf
MSWOR...@v3.0.0.264 (US MM English)=C:\MSWORKS\setup\setup.stf
MSWOR...@v3.0.0.273 (Español)=C:\MSWORKS\instalar\instalar.stf
[Microsoft Multimedia Catalog]
CatalogNum=1
Path=D:\mmcat\
ParentCD=Microsoft Encarta 1993
[Encarta]
FILE_usa.dct=
FILE_usa.ths=
ThsFile=C:\ENCARTA\usa.ths
DctFile=D:\encarta\usa.dct
[spooler]
window=0 0 636 408
priority=high
DisplaySize=no
DisplayTime=yes
[colors]
Background=0 64 128
AppWorkspace=255 255 255
Window=255 255 255
WindowText=0 0 0
Menu=255 255 255
MenuText=0 0 0
ActiveTitle=64 128 128
InactiveTitle=192 192 192
TitleText=255 255 255
ActiveBorder=255 128 64
InactiveBorder=192 192 192
WindowFrame=0 0 0
Scrollbar=192 192 192
ButtonFace=192 192 192
ButtonShadow=128 128 128
ButtonText=0 0 0
GrayText=128 128 128
Hilight=0 128 128
HilightText=255 255 255
InactiveTitleText=0 0 0
ButtonHilight=255 255 255
[MSWrite]
Backup=0
[Crayola]
Warning=1
[SciCalc]
layout=1
[Cardfile]
ValidateFileWrite=1
[Multimedia Viewer]
M_WindowPosition=[284,0,356,449,0]
H_WindowPosition=[213,160,213,160,0]
[MSCharMap]
Font=Amphion
[Terminal]
Port=None
[STW]
dir=C:\STW_WIN
[drawdib]
display.drv=vga4a8t.drv 640x480x8
Result8=15
Result16=0
Result24=1
[AAPLAY Animation]
DualScreen=0
FullScreen=AAVGA.DLL
FullInstalled=1
[IJ4076,LPT1]
prtcaps2=15
FontSummary=C:\WINDOWS\PT3LPT1.PCL
[Paintbrush]
OmitPictureFormat=0
width=491
height=680
clear=B/W
[RegEdit]
width=280
height=156
[PCFaxCompatibility]
msworks=1
[IJ4076,LPT1:ÿÿÿüÿüÿÿÿÿ]
FontSummary=C:\WINDOWS\PT3ÿÿÿüÿ.PCL
[IJ4076,LPT1:ÿÿÿüÿü]
FontSummary=C:\WINDOWS\PT3ÿÿÿüÿ.PCL
[IJ4076,LPT1:Draw]
FontSummary=C:\WINDOWS\PT3Draw.PCL
[IJ4076,LPT1:PAL]
FontSummary=C:\WINDOWS\PT3PAL.PCL
[IJ4076,LPT1:þÿÿÿÿÿø?à ]
FontSummary=C:\WINDOWS\PT3þÿÿÿÿ.PCL
[ACSATLAS]
path=C:\ATLAS\ATLAS\
Int=yes
USA=yes
[MaxFax]
RCode=NEVER
[IJ4076,LPT1:ÿÿÿüÿüª]
FontSummary=C:\WINDOWS\PT3ÿÿÿüÿ.PCL
[IJ4076,LPT1:ÿÿÿüÿüª]
FontSummary=C:\WINDOWS\PT3ÿÿÿüÿ.PCL
[Netscape]
ini=C:\Netscape\NETSCAPE.INI
[SSPI]
SecurityProviders=msapsp16.dll,security.dll,msnssp16.dll
[sounds]
SystemAsterisk=C:\WINDOWS\CHIMES.WAV,Asterisk
SystemHand=chord.wav,Critical Stop
SystemDefault=ding.wav,Default Beep
SystemExclamation=chord.wav,Exclamation
File's Done=FileDone.wav,File's Done
Goodbye=Goodbye.wav,Goodbye
IM=IM.wav,IM
SystemQuestion=chord.wav,Question
Welcome=Welcome.wav,Welcome
Exit=chimes.wav,Windows Exit
SystemStart=tada.wav,Windows Start
You've Got Mail=GotMail.wav,You've Got Mail
[IBM 4076 ExecJet II Printer,LPT1]
paper=1
prtcaps=2708
paperind=0
prtcaps2=15
ttraster=1
[PrinterPorts]
IBM 4076 ExecJet II Printer=IJ4076,LPT1:,15,45
[devices]
IBM 4076 ExecJet II Printer=IJ4076,LPT1:
--------------------------system.ini-----------------------
[boot]
shell=progman.exe
mouse.drv=lmouse.drv
network.drv=
language.dll=
drivers=mmsystem.dll power.drv
sound.drv=mmsound.drv
comm.drv=comm.drv
keyboard.drv=keyboard.drv
system.drv=system.drv
386grabber=v7vga.3gr
oemfonts.fon=vga850.fon
286grabber=vgacolrx.gr2
fixedfon.fon=vgafix.fon
fonts.fon=vgasys.fon
display.drv=vga4a8t.drv
SCRNSAVE.EXE=C:\WINDOWS\SSMYST.SCR
[keyboard]
subtype=
type=4
keyboard.dll=kbdla.dll
oemansi.bin=xlat850.bin
[boot.description]
keyboard.typ=Enhanced 101 or 102 key US and Non US keyboards
mouse.drv=Compaq Mouse
network.drv=No Network Installed
language.dll=English (American)
system.drv=MS-DOS System with APM
codepage=850
woafont.fon=Multi-Lingual (850)
aspect=100,96,96
display.drv=Compaq/ET4-W32 640x480 256 color
[386Enh]
DEVICE=VSHARE.386
32BitDiskAccess=ON
mouse=lvmd.386
network=*dosnet,*vnetbios
device=vpowerd.386
ebios=*ebios
woafont=app850.fon
display=vddtli4.386
EGA80WOA.FON=EGA80850.FON
EGA40WOA.FON=EGA40850.FON
CGA80WOA.FON=CGA80850.FON
CGA40WOA.FON=CGA40850.FON
keyboard=*vkd
device=vtdapi.386
device=*vpicd
device=*vtd
device=*reboot
device=*vdmad
device=*vsd
device=*v86mmgr
device=*pageswap
device=*dosmgr
device=*vmpoll
device=*wshell
device=*BLOCKDEV
device=*PAGEFILE
device=*vfd
device=*parity
device=*biosxlat
device=*vcd
device=*vmcpd
device=*combuff
device=*cdpscsi
local=CON
FileSysChange=off
DEVICE=C:\DOS\VFINTD.386
PagingFile=C:\WINDOWS\WIN386.SWP
MaxPagingFileSize=12288
device=cpqwdctl.386
device=cpqint13.386
device=vsbpd.386
DMABufferSize=128
COM2Base=2f8h
COM2Irq=3
device=LEX01.386
COM3Base=3e8h
COM3Irq=3
COM1Base=03F8
COM1Irq=4
[standard]
[NonWindowsApp]
localtsrs=dosedit,ced
CommandEnvSize=1536
[mci]
WaveAudio=mciwave.drv
Sequencer=mciseq.drv
CDAudio=mcicda.drv
AVIVideo=mciavi.drv
MMMovie=mcimmp.drv
[drivers]
timer=timer.drv
midimapper=midimap.drv
MIDI=sb16fm.drv
Aux=sb16aux.drv
Wave=sb16snd.drv
MIDI1=sb16snd.drv
VIDC.MSVC=msvidc.drv
WaveMapper=msacm.drv
VIDC.CVID=iccvid.drv
VIDC.RT21=indeo.drv
[LogiMouse]
Release=2.23
LockSetting=No
Type=Serial
ConnectedModel=3_ButtonMouse
DragLock=None
Port=2
[sndblst.drv]
Port=220
MidiPort=330
Int=5
DmaChannel=1
HDmaChannel=5
[msacm]
Install=msadpcm.acm
[SHIVAPPP]
ClaimPort=4
--------------------------------------
Jerry Lippey/MVP wrote:
--
pedro R.
-------------------------NOSPAM SIGNATURE!-------------------------
To send me email/Para enviarme e-mail:
Replace 'nospam' for 'geocities'/Reemplace 'nospam' por 'geocities'
---------------------------FIRMA NOSPAM!---------------------------
Jerry Lippey/MVP
will not load, tell us exactly what happens. If you have an error message quote
it exactly and tell us at what point it occurs.
Since you have changed the video card, it is very likely that you need a
different video driver. You can change that from DOS without Windows running as
follow. Change to the Windows directory (CD WINDOWS) and key SETUP. Drop the
list of display drivers and choose the appropriate one. At the bottom of the
list is Other. Use that to choose the driver that came with your video card.
Jerry Lippey/MVP
supports your new video card, as I have explained in my previous message. You
must do this before Windows will run. (That will change three lines in the
System.ini file.) Do you have a problem with this?
For the flavor of what's happening, see this article.
http://support.microsoft.com/support/kb/articles/Q84/5/79.asp
("Invalid VxD Dynamic Link Call to Device Number 000A")
--
-Jerry
pedro ramirez wrote:
>
> thanks again.
> well, i get to see the windows 3.1 compaq logo in the middle of the screen.
> then it disappears and i get this messsage:
>
> Cannot find a device file that may be needed to run Windows in
> 386 enhanced mode.
>
>
> You need to run the setup program again.
> display.386
> Press a key to continue.
>
> (so i press a key and i get:)
>
>
> Invalid VxD dynamic link call to device number 000A, service 0007.
> Your Windows configuration is invalid. Run the Windows Setup program
>
> again to correct this problem.
> C:>
>
> so i then run the setup program, and i get:
>
>
> Setup has found a previous version of Microsoft Windows on your
> hard...
>
>
> But I don't have the disks to set it up again (!).. there's no illegal thing
> here this computer was bought in the U.S. everything OK, but.. no win3.x
> disks.
>
> so, i already went through all the possibilities listed in the file you
> suggested me to download from microsoft, and no change.
>
> thanks for the help,
>
> pedro
pedro ramirez
directory and changed video to OTHER, and the computer after showing the
logo stops with a colored blurred and flashig kind of screen display.
so...?
thanks
pedro
pedro ramirez wrote:
>> Before we talk about the files, Pedro, we need to know more. If
>> Windows still
>> will not load, tell us exactly what happens. If you have an error
>> message quote
>> it exactly and tell us at what point it occurs.
>>
>> Since you have changed the video card, it is very likely that you
>> need a
>> different video driver. You can change that from DOS without Windows
>> running as
>> follow. Change to the Windows directory (CD WINDOWS) and key SETUP.
>> Drop the
>> list of display drivers and choose the appropriate one. At the
>> bottom of the
>> list is Other. Use that to choose the driver that came with your
>> video card.
>> --
>> -Jerry
>
pedro ramirez
video drivers. windows ran. two things:
1. the video display is very very slow, everything redraws very slowly, so i think
there's always some wrong driever or mode running the video card.
2. the compaq mouse won't work. already changed it to logitech, genius, and many
others in the drop down list.
thanks,
pedro
Jerry Lippey/MVP wrote:
> Pedro, this message indicates that you have not changed to the video driver that
> supports your new video card, as I have explained in my previous message. You
> must do this before Windows will run. (That will change three lines in the
> System.ini file.) Do you have a problem with this?
>
> For the flavor of what's happening, see this article.
>
> http://support.microsoft.com/support/kb/articles/Q84/5/79.asp
> ("Invalid VxD Dynamic Link Call to Device Number 000A")
> --
> -Jerry
>
> pedro ramirez wrote:
> >
> > > Before we talk about the files, Pedro, we need to know more. If Windows
> > > still
> > > will not load, tell us exactly what happens. If you have an error message
> > > quote
> > > it exactly and tell us at what point it occurs.
> > >
> > > Since you have changed the video card, it is very likely that you need a
> > > different video driver. You can change that from DOS without Windows running
> > > as
> > > follow. Change to the Windows directory (CD WINDOWS) and key SETUP. Drop the
> > >
> > > list of display drivers and choose the appropriate one. At the bottom of the
> > >
> > > list is Other. Use that to choose the driver that came with your video card.
> > >
> > > --
> > > -Jerry
--
Jerry Lippey/MVP
> there's always some wrong driever or mode running the video card.
You need to locate the proper driver for your new card, Pedro. If no Windows 3.1
driver came with it, check the manufacturer's web site.
It's also possible that they have no 16-bit driver for a very recent card. You
may want to reinstall the old card.
> the compaq mouse won't work. already changed it to logitech, genius, and many
> others in the drop down list.
If you're talking about the mouse in Windows, you'll need to experiment. The
classic fix is to reinstall it. So maybe you will need to get a new one that
comes with the software.
I'll be away for a while starting about 18 hours from this post. I'm traveling
from California to Tokyo. I'll try to check in here from Japan. Otherwise, it
will be about 11 days.
--
-Jerry
pedro ramirez wrote:
>
> sorry, i just didnt'understand you or got it wrong, i saw that and i changed the
> video drivers. windows ran. two things:
>
> 1. the video display is very very slow, everything redraws very slowly, so i think
> there's always some wrong driever or mode running the video card.
>
> 2. the compaq mouse won't work. already changed it to logitech, genius, and many
> others in the drop down list.
>
> thanks,
>
> pedro
>
> Jerry Lippey/MVP wrote:
>
> > Pedro, this message indicates that you have not changed to the video driver that
> > supports your new video card, as I have explained in my previous message. You
> > must do this before Windows will run. (That will change three lines in the
> > System.ini file.) Do you have a problem with this?
> >
> > For the flavor of what's happening, see this article.
> >
> > http://support.microsoft.com/support/kb/articles/Q84/5/79.asp
> > ("Invalid VxD Dynamic Link Call to Device Number 000A")
> > --
> > -Jerry
> >
> > pedro ramirez wrote:
> > >
> > > > Before we talk about the files, Pedro, we need to know more. If Windows
> > > > still
> > > > will not load, tell us exactly what happens. If you have an error message
> > > > quote
> > > > it exactly and tell us at what point it occurs.
> > > >
> > > > Since you have changed the video card, it is very likely that you need a
> > > > different video driver. You can change that from DOS without Windows running
> > > > as
> > > > follow. Change to the Windows directory (CD WINDOWS) and key SETUP. Drop the
> > > >
> > > > list of display drivers and choose the appropriate one. At the bottom of the
> > > >
> > > > list is Other. Use that to choose the driver that came with your video card.
> > > >
> > > > --
> > > > -Jerry
>
pedro ramirez
i think i'll buy a standard mouse. because i tried with another mouse and windows 3.1
recognized the mouse and it worked and also i already tried insalling a mouse software
driver from logitech and it didn't find the mouse.
already loaded the right trident video card drivers but it remais very slow.
thanks
pedro
Jerry Lippey/MVP wrote:
> > the video display is very very slow, everything redraws very slowly, so i think
> > there's always some wrong driever or mode running the video card.
>
> You need to locate the proper driver for your new card, Pedro. If no Windows 3.1
> driver came with it, check the manufacturer's web site.
>
> It's also possible that they have no 16-bit driver for a very recent card. You
> may want to reinstall the old card.
>
> > the compaq mouse won't work. already changed it to logitech, genius, and many
> > others in the drop down list.
>
> If you're talking about the mouse in Windows, you'll need to experiment. The
> classic fix is to reinstall it. So maybe you will need to get a new one that
> comes with the software.
>
> I'll be away for a while starting about 18 hours from this post. I'm traveling
> from California to Tokyo. I'll try to check in here from Japan. Otherwise, it
> will be about 11 days.
> --
> -Jerry
>
> pedro ramirez wrote:
> >
> > sorry, i just didnt'understand you or got it wrong, i saw that and i changed the
> > video drivers. windows ran. two things:
> >
> > 1. the video display is very very slow, everything redraws very slowly, so i think
> > there's always some wrong driever or mode running the video card.
> >
> > 2. the compaq mouse won't work. already changed it to logitech, genius, and many
> > others in the drop down list.
> >
> > thanks,
> >
> > pedro
> >
> > Jerry Lippey/MVP wrote:
> >
> > > Pedro, this message indicates that you have not changed to the video driver that
> > > supports your new video card, as I have explained in my previous message. You
> > > must do this before Windows will run. (That will change three lines in the
> > > System.ini file.) Do you have a problem with this?
> > >
> > > For the flavor of what's happening, see this article.
> > >
> > > http://support.microsoft.com/support/kb/articles/Q84/5/79.asp
> > > ("Invalid VxD Dynamic Link Call to Device Number 000A")
> > > --
> > > -Jerry
> > >
> > > pedro ramirez wrote:
> > > >
> > > > > Before we talk about the files, Pedro, we need to know more. If Windows
> > > > > still
> > > > > will not load, tell us exactly what happens. If you have an error message
> > > > > quote
> > > > > it exactly and tell us at what point it occurs.
> > > > >
> > > > > Since you have changed the video card, it is very likely that you need a
> > > > > different video driver. You can change that from DOS without Windows running
> > > > > as
> > > > > follow. Change to the Windows directory (CD WINDOWS) and key SETUP. Drop the
> > > > >
> > > > > list of display drivers and choose the appropriate one. At the bottom of the
> > > > >
> > > > > list is Other. Use that to choose the driver that came with your video card.
> > > > >
> > > > > --
> > > > > -Jerry
> >
Jerry Lippey/MVP
http://www.trid.com/HTML/drivers.htm
--
-Jerry
pedro ramirez wrote:
>
> good luck on the trip.
>
> i think i'll buy a standard mouse. because i tried with another mouse and windows 3.1
> recognized the mouse and it worked and also i already tried insalling a mouse software
> driver from logitech and it didn't find the mouse.
>
> already loaded the right trident video card drivers but it remais very slow.
>
> thanks
>
> pedro
>
> Jerry Lippey/MVP wrote:
>
> > > the video display is very very slow, everything redraws very slowly, so i think
> > > there's always some wrong driever or mode running the video card.
> >
> > You need to locate the proper driver for your new card, Pedro. If no Windows 3.1
> > driver came with it, check the manufacturer's web site.
> >
> > It's also possible that they have no 16-bit driver for a very recent card. You
> > may want to reinstall the old card.
> >
> > > the compaq mouse won't work. already changed it to logitech, genius, and many
> > > others in the drop down list.
> >
> > If you're talking about the mouse in Windows, you'll need to experiment. The
> > classic fix is to reinstall it. So maybe you will need to get a new one that
> > comes with the software.
> >
> > I'll be away for a while starting about 18 hours from this post. I'm traveling
> > from California to Tokyo. I'll try to check in here from Japan. Otherwise, it
> > will be about 11 days.
> > --
> > -Jerry
> >
> > pedro ramirez wrote:
> > >
> > > sorry, i just didnt'understand you or got it wrong, i saw that and i changed the
> > > video drivers. windows ran. two things:
> > >
> > > 1. the video display is very very slow, everything redraws very slowly, so i think
> > > there's always some wrong driever or mode running the video card.
> > >
> > > 2. the compaq mouse won't work. already changed it to logitech, genius, and many
> > > others in the drop down list.
> > >
> > > thanks,
> > >
> > > pedro
> > >
> > > Jerry Lippey/MVP wrote:
> > >
> > > > Pedro, this message indicates that you have not changed to the video driver that
> > > > supports your new video card, as I have explained in my previous message. You
> > > > must do this before Windows will run. (That will change three lines in the
> > > > System.ini file.) Do you have a problem with this?
> > > >
> > > > For the flavor of what's happening, see this article.
> > > >
> > > > http://support.microsoft.com/support/kb/articles/Q84/5/79.asp
> > > > ("Invalid VxD Dynamic Link Call to Device Number 000A")
> > > > --
> > > > -Jerry
> > > >
> > > > pedro ramirez wrote:
> > > > >
> > > > > > Before we talk about the files, Pedro, we need to know more. If Windows
> > > > > > still
> > > > > > will not load, tell us exactly what happens. If you have an error message
> > > > > > quote
> > > > > > it exactly and tell us at what point it occurs.
> > > > > >
> > > > > > Since you have changed the video card, it is very likely that you need a
> > > > > > different video driver. You can change that from DOS without Windows running
> > > > > > as
> > > > > > follow. Change to the Windows directory (CD WINDOWS) and key SETUP. Drop the
> > > > > >
> > > > > > list of display drivers and choose the appropriate one. At the bottom of the
> > > > > >
> > > > > > list is Other. Use that to choose the driver that came with your video card.
> > > > > >
> > > > > > --
> > > > > > -Jerry
> > >