Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss
IPv6 configuration
1 view
Skip to first unread message
Andy
Dec 14, 2009, 1:56:01 PM12/14/09
to
Hi,
On Windows Vista, I programatically configured the IPv6 global unicast
address to the active NIC with following values:
IPv6 address=2001:1890:111b:3bbb:6390:ed54:d3cf:54
Prefix Length=64
Nexthop=on-link
I also configured default route (::/0) with index of active NIC.
But when I tried to use Wireshark to send ICMPv6 message when I try ping
2001:1890:111b:3064::2, Wireshark doesn't show any ICMPv6 echo request, only
some ICMPv6 neighbor solicatioor message.
Anything wrong with the IPv6 configuration?
TIA.
mosesvas
Dec 18, 2009, 5:18:51 AM12/18/09
to
Hi andy,
In wireshark filter type udp.port == <ur teredo udp port>, in this
case its 6390. Right click the sniffed packets & forcefully decode as
teredo. You should be able to see the packets now.
regards
vasanth
In wireshark filter type udp.port == <ur teredo udp port>, in this
case its 6390. Right click the sniffed packets & forcefully decode as
teredo. You should be able to see the packets now.
regards
vasanth
0 new messages