routing problem w/2 nic
dossa sprinkle
external nic goes to router for web access.the internal card goes to
client machines.i have set up server as network router and installed rip
on external nic, both with default settings. server can access both
netwotks.the client machines can not get web connection.
am I missing something
Stuart
Besides the obvious....Have the clients default gateway set to internal card
of server...? Can the clients ping/see the server?
--Stuart
dossa sprinkle
server shares
Fredrik Rubne
Internet access. I悲 working with my routing problem for tow weeks and i惴
going crazy.
I have W2k Server. 2 nic愀. two subnets
Nic 1 10.32.0.1 255.224.0.0
Nic 2 10.64.0.1 255.224.0.0
Computer with 10.32.0.2 (gateway 10.32.0.1) can ping 10.32.0.1 and 10.64.0.1
but NOT 10.64.0.2
Computer with 10.64.0.2 (gateway 10.64.0.1) can ping 10.64.0.1 and 10.32.0.1
but NOT 10.32.0.2
Got the picture??
I愣ave installed ras_route service, change the registy
hkey_local_machine_system_currentcontrolset_services_tcpip_parametners
IPEnableRouter to 1. Checked the routing table i the look愀 fine. What is
the problem?? have u find a solution?
I愣ave spoken with technet personal here in Sweden but the can愒 find the
problem. Can this be the Win2K RC3 and they fix this in final version.
Please Tell Me
***********************************
Fredrik Rubne
MCSE. MCP+Intenet.MOUS
Sweden
***********************************
"dossa sprinkle" <do...@ddplus.co.uk> wrote in message
news:DD8C7CE3FFD94B4283A804C7D7B61FB6453CDF@CPMSFTMSGV22...
John Fournier
-John
www.silco.com
------------------------
"Fredrik Rubne" <fredri...@contici.se> wrote in message
news:#AtZ4B0b$GA.219@cppssbbsa04...
Fredrik Rubne
internal interface is enable and connected. But if you now look in pic 2 (Ip
routing general) it is not available. Is this wrong?? Sending my routing
table.
> I have W2k Server. 2 nic´s. two subnets
>
> Nic 1 10.32.0.2 255.224.0.0
>
> Nic 2 10.96.0.1 255.224.0.0
>
> Computer with 10.32.0.10 (gateway 10.32.0.2) can ping 10.32.0.2 and
10.96.0.1
> but NOT 10.64.0.2
>
> Computer with 10.96.0.10 (gateway 10.96.0.1) can ping 10.96.0.1 and
10.32.0.2
> but NOT 10.32.0.1
>
> Got the picture??
Fredrik Rubne
fredri...@contici.se
C:\>route print
===========================================================================
Interface List
0x1 ........................... MS TCP Loopback interface
0x2 ...00 50 da 47 89 51 ...... 3Com EtherLink PCI
0x1000004 ...00 10 5a 01 1f 62 ...... 3Com 3C90x Ethernet Adapter
===========================================================================
===========================================================================
Active Routes:
Network Destination Netmask Gateway
Interface Metric
10.32.0.0 255.224.0.0
10.32.0.2 10.32.0.2 1
10.32.0.2 255.255.255.255 127.0.0.1
127.0.0.1 1
10.96.0.0 255.224.0.0
10.96.0.1 10.96.0.1 1
10.96.0.1 255.255.255.255 127.0.0.1
127.0.0.1 1
10.255.255.255 255.255.255.255 10.32.0.2
10.32.0.2 1
10.255.255.255 255.255.255.255 10.96.0.1
10.96.0.1 1
127.0.0.0 255.0.0.0
127.0.0.1 127.0.0.1 1
224.0.0.0 224.0.0.0
10.32.0.2 10.32.0.2 1
224.0.0.0 224.0.0.0
10.96.0.1 10.96.0.1 1
255.255.255.255 255.255.255.255 10.32.0.2
10.32.0.2 1
===========================================================================
Persistent Routes: None
Hoping for answer
Fredrik Rubne
MCSE.MCP+Internet.MOUS
Sweden
fredri...@contci.se
"John Fournier" <sil...@silco.com> wrote in message
news:OQCDzf5b$GA.258@cppssbbsa05...
> Post your routing table for each NIC.
>
> -John
> www.silco.com
> ------------------------
> "Fredrik Rubne" <fredri...@contici.se> wrote in message
> news:#AtZ4B0b$GA.219@cppssbbsa04...
> Please tell me if u find a solution. I had to install Proxy server to get
> Internet access. I´d working with my routing problem for tow weeks and i´m
> going crazy.
>
> I have W2k Server. 2 nic´s. two subnets
>
> Nic 1 10.32.0.1 255.224.0.0
>
> Nic 2 10.64.0.1 255.224.0.0
>
> Computer with 10.32.0.2 (gateway 10.32.0.1) can ping 10.32.0.1 and
10.64.0.1
> but NOT 10.64.0.2
>
> Computer with 10.64.0.2 (gateway 10.64.0.1) can ping 10.64.0.1 and
10.32.0.1
> but NOT 10.32.0.2
>
> Got the picture??
>
> I´have installed ras_route service, change the registy
> hkey_local_machine_system_currentcontrolset_services_tcpip_parametners
> IPEnableRouter to 1. Checked the routing table i the look´s fine. What is
> the problem?? have u find a solution?
>
> I´have spoken with technet personal here in Sweden but the can´t find the
John Fournier
addresses you gave me. According to your routing table, your NICs are at
10.32.0.2 and 10.96.0.1.
Also, if you aren't using RIP or OPSF, you need to put in static routes to
the default gateway of each other card on each interface (for bi-directional
routing). In other words, you need to add a 0.0.0.0 route on each interface
to the gateway of the other interface (probably a router).
-John
www.silco.com
------------------------
"Fredrik Rubne" <fredri...@contici.se> wrote in message
news:#D0ddSgc$GA.296@cppssbbsa05...
Here is my routing table. i notice something, if you look in picture 1,
internal interface is enable and connected. But if you now look in pic 2 (Ip
routing general) it is not available. Is this wrong?? Sending my routing
table.
> I have W2k Server. 2 nic愀. two subnets
Fredrik Rubne
fredri...@contici.se
Hoping for answer
> Internet access. I悲 working with my routing problem for tow weeks and i惴
> going crazy.
>
> I have W2k Server. 2 nic愀. two subnets
>
> Nic 1 10.32.0.1 255.224.0.0
>
> Nic 2 10.64.0.1 255.224.0.0
>
> Computer with 10.32.0.2 (gateway 10.32.0.1) can ping 10.32.0.1 and
10.64.0.1
> but NOT 10.64.0.2
>
> Computer with 10.64.0.2 (gateway 10.64.0.1) can ping 10.64.0.1 and
10.32.0.1
> but NOT 10.32.0.2
>
> Got the picture??
>
> I愣ave installed ras_route service, change the registy
> hkey_local_machine_system_currentcontrolset_services_tcpip_parametners
> IPEnableRouter to 1. Checked the routing table i the look愀 fine. What is
> the problem?? have u find a solution?
>
> I愣ave spoken with technet personal here in Sweden but the can愒 find the
John Fournier
-John
www.silco.com
------------------------
"John Fournier" <sil...@silco.com> wrote in message
news:eguOTokc$GA.257@cppssbbsa05...
<SNIP>
Also, if you aren't using RIP or OPSF,
<SNIP>
Fredrik Rubne
Yes, IP for the Nic愀 are 10.32.0.2 and 10.96.0.1
but add 0.0.0.0.0 route do you mean like this
> Active Routes:
> Network Destination Netmask Gateway Interface Metric
0.0.0.0 255.224.0.0 10.32.0.2 10.96.0.1 1
0.0.0.0 255.224.0.0 10.96.0.1 10.32.0.2 1
> 10.32.0.0 255.224.0.0 10.32.0.2 10.32.0.2 1
> 10.32.0.2 255.255.255.255 127.0.0.1 127.0.0.1 1
> 10.96.0.0 255.224.0.0 10.96.0.1 10.96.0.1 1
> 10.96.0.1 255.255.255.255 127.0.0.1 127.0.0.1 1
> 10.255.255.255 255.255.255.255 10.32.0.2 10.32.0.2 1
> 10.255.255.255 255.255.255.255 10.96.0.1 10.96.0.1 1
> 127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1
> 224.0.0.0 224.0.0.0 10.32.0.2 10.32.0.2 1
> 224.0.0.0 224.0.0.0 10.96.0.1 10.96.0.1 1
> 255.255.255.255 255.255.255.255 10.32.0.2 10.32.0.2 1
>
===========================================================================
> Persistent Routes: None
Havent try this yet, hoping i get it right this time, please verify.
Have to restudy my MCP i TCP/IP. Have u find any real good book for TCP/IP
handling in Win2k?
Please replay
Fredrik Rubne
Sweden
************************************************
"John Fournier" <sil...@silco.com> wrote in message
news:eguOTokc$GA.257@cppssbbsa05...
> I don't see your pictures, but your routing table does not reflect the IP
> addresses you gave me. According to your routing table, your NICs are at
> 10.32.0.2 and 10.96.0.1.
>
> Also, if you aren't using RIP or OPSF, you need to put in static routes to
> the default gateway of each other card on each interface (for
bi-directional
> routing). In other words, you need to add a 0.0.0.0 route on each
interface
> to the gateway of the other interface (probably a router).
>
Fredrik Rubne
If u have the time can u give me a step by step instruction how to fix this
problem ??
i understand if u don愒 have the time.
Ihave 1 Win2k server 2 Nic愀 10.32.0.2 and 10.96.0.1 subnet 255.224.0.0
I use two DHCP-scoop for the clients and static IPadress for my server愀
I whant to use this server to act as a router between my two subnet愀
(10.32.0.0 and 10.96.0.0)
I think i know the drill but whant are i doing wrong? Can you tell my ,step
by step, how yo solve this problem.
I have fighting this problem for tree week愀, reading technet and resource愀
kit. Nothing !!!
Pease,please help me !!!!
Fredrik Rubne
MCSE. MCP+Internet. MOUS
Sweden