is it possible to determine the number of a Geometry Section
in that Geometry Section itself, e. g. Geometry 1 should result
in 1, Geometry 2 in 2 and so on. I must calculate offsets which
are just depending from the number of the Geometry Section.
Thanks in advance
If you want to do this from the Shapesheet directly, I don't know of a
Office Graphics - Visio
This posting is provided "AS IS" with no warranties, and confers no rights.
"JuneTheSecond" <JuneTh...@discussions.microsoft.com> wrote in message
my aim is to determine the number in the Shapesheet directly,
but I can use your hints using automation for another purpose,
Thanks for your efforts.
It depends what you want to do with your geometry cells.
I can imagine that you for instance increase the width in geometry1 and then
simultaneously want to increase the width in geometry2 but how to tell the
In the following scenario I change the width of the Geometry1.X1 cell and
then activate a Custom Property cell with the value.
And vice versa if you have a change in Geometry2.X1 you can set a value in
another Custom Property cell.
1. add two custom property cells one called Prop.Geo1 and one called
2. create a User Defined cell and place the following formula in the Value
So based on the width value (here 0.2727) you set the value of Geo2 to '2'
but when this value changes the custom property goes to '0'
If it is really handy? Don't know.
But you have a way to capture the geometry row number in the shapesheet
"Udo Weik" <WeikE...@aol.com> wrote in message
Create a User-defined cell, say GeometryCount, and enter the following
Since there can be 255(?) Geometry Sections, you an extend the above
formula, if you need to check for more than 10 sections.
Also, if you need it to evaluate periodically the add DEPENDSON(NOW())+
after the = sign.
"Mark Nelson [MS]" <mar...@online.microsoft.com> wrote in message