D-trust Card Assistant Download ((FULL))

[Djuan Rugs]

<div>According to legal requirements, ordering a signature or seal card must always be accompanied by the personal identification of the applicant. This is prescribed by the eIDAS Regulation for trust services. For this purpose you are required to present an official identification document (e.g. ID card), passport, or electronic residence permit (eRP), which is valid for at least four weeks from the point of submission.</div><div></div><div></div><div>Depending on the card type, all cards can currently can either be ordered via the D-Trust portal, or via special application pages. This page explains which link can be used to order your card: Ordering signature and seal cards.</div><div></div><div></div><div></div><div>d-trust card assistant download</div><div></div><div>Download &middot;&middot;&middot;&middot;&middot; https://t.co/zEJ51h2GtB</div><div></div><div></div><div></div><div></div><div></div><div></div><div>As an alternative to applying for a follow-up card electronically via the SMS-TAN method, you can also request an order password to apply for a follow-up card digitally. After you request the order password, we will generate it and post it to you.</div><div></div><div></div><div>With our simplified application procedure, you do not need to submit an ID document for two follow-up card applications. On the third application for a follow-up card, we are obliged to request ID again for regulatory reasons. In this case, please order a new signature card via the D-Trust Portal or contact the issuing office of the organisation where you originally purchased your signature card.</div><div></div><div></div><div>If you are affected by this regulation, please order your new signature card via the D-Trust Portal or contact the issuing office of the organisation from which you originally purchased your signature card.</div><div></div><div></div><div>Have you completed the identification process and sent all necessary documents to D-Trust? This must be done before starting the production of your card. The production of your signature or seal card goes through various processes: from checking the documents for completion to creating the certificate. Therefore, please allow some time between requesting the signature or seal card and receiving it.</div><div></div><div></div><div></div><div></div><div></div><div></div><div>When you log in, you will also find all of the steps and documents required to produce your card in the dashboard of the D-Trust Portal, right next to the corresponding order. At the end of the order process, you will also be provided with a checklist for download. This is intended to assist you in the further processing of your application and in your personal identification.</div><div></div><div></div><div>Certificates for qualified signature cards are always issued to the applicant (natural person). You can also have the name of the organisation where you are employed included in the certificate. In this case, an authorised signatory of the organisation must sign the organisation affiliation certificate (OZB) for your application. The OZB form is provided at the end of the application process and must be sent to D-Trust along with the application documents.</div><div></div><div></div><div>Please note: Seal certificates (made out to legal entities) always include the name of the organisation. Only authorised signatories of an organisation can apply for a qualified seal card.</div><div></div><div></div><div>Partnered with more than 60 Chambers of Industry and Commerce across Germany, D-Trust offers a member service for signature cards. You will be guided through the application process and your identity will be confirmed at the same time. You can find a list of participating IHK offices here.</div><div></div><div></div><div>For experts who participate in electronic legal communications with courts a fact sheet that explains the procurement and use of signature cards can be accessed via the following link:</div><div></div><div></div><div>For publicly appointed and sworn experts in craft occupations , D-Trust offers a special application page. If this applies to you, please use this application page to order your signature card.</div><div></div><div></div><div></div><div></div><div>You will always receive the link to download the free D-Trust Card Assistant software automatically by e-mail when your card is produced by D-Trust. We recommend that you always use the current version of D-Trust Card Assistant.</div><div></div><div></div><div>Please see our special information page about using your card for the first time: -trust.net/de/inbetriebnahme-karten. Here you can find an overview of the respective requirements of the card generations D-Trust Card 4.1 /. D-Trust Card 4.4 as well as D-Trust Card 5.1 / D-Trust Card 5.4.</div><div></div><div></div><div>If you enter an incorrect card PIN more than three times, this PIN will be locked. To unlock the card, you will need your PUK and the D-Trust Card Assistant software, which you also need to activate the card.</div><div></div><div></div><div>Entering the 6-digit CAN allows a secure channel to be established with the card chip, through which the card communicates with your software application. The CAN can be saved by the application so that it only needs to be entered upon first use.</div><div></div><div></div><div>Please note that the SMS-TAN method is not available for all order channels. In particular, it is not available for cards ordered in the D-Trust Portal. If the SMS-TAN method is offered as an option, you will be informed of this in the order process. In this case, your phone number is stored with D-Trust exclusively for this purpose and can be used for the SMS-TAN method.</div><div></div><div></div><div>On our main overview page you can find a list of signature software from various manufacturers that you can use with our signature cards. What if your provider is not on the list? Please contact our sales department (vertrieb d-trust.net) so that we can check whether the signature components support our cards.</div><div></div><div></div><div>Revocation can be done in writing or electronically via the customer portal ( -trust.net/sperren). For each card, a person authorised to revoke is kept on file for the organisation and is given a revocation password by D-Trust.</div><div></div><div></div><div>If you have not yet requested a signature or seal card, you can enter your mobile phone number as part of your first-time application. This exclusively applies to cards that were not ordered via the D-Trust portal. Your phone number is then exclusively stored with D-Trust for this purpose and can be used for the SMS TAN method.</div><div></div><div></div><div>There is also the option to register your mobile number later. To do this, you will need the registration secret that we already sent by post to the registered address for your signature card. Request your registration secret here.</div><div></div><div></div><div>Please note: Please note that all cards provided via the D-Trust Portal cannot be revoked using the SMS/TAN method. These cards can be revoked once you have logged into the D-Trust portal. More information about certificate revocation can be found here.</div><div></div><div></div><div>Please note: For cards ordered via the D-Trust portal, the claim option can be found directly in the portal. More information about claims regarding your signature or seal can be found here.</div><div></div><div></div><div></div><div></div><div>Different key procedures are used with the D-Trust signature cards. For this reason, please note that the Nexus Personal software only supports D-Trust single signature cards (D-Trust Card Standard or D-Trust Card UPC). It is not possible to use batch or multi-signature cards with this.</div><div></div><div></div><div>For the Unified Patent Court (UPC) application, a signature card is required that contains a qualified certificate for authentication for the application in addition to a qualified certificate for the electronic signature.</div><div></div><div></div><div>To use the card with the UPC application, you will need a card reader and additional software, called middleware, for the authentication application (recommended: Nexus Personal) and signature software.</div><div></div><div></div><div>The application of the EU product database EPREL (EU Product Database for Energy Labelling) requires the use of qualified seals. Please order at least one qualified seal card (individual seal card, D-Trust Card Standard seal) via the D-Trust portal. If you already have a D-Trust Multi-seal card, you can also use this card.</div><div></div><div></div><div>In order to read out the organisation identifier from your D-Trust seal card, you will need the D-Trust Card Assistant software. This will be provided for you as a free download when you order a seal card from D-Trust. Please observe the instructions in the PDF guide on reading out the organisation identifier.</div><div></div><div></div><div>Cards from the 5.x generation (signature D-Trust card 5.1 and seal D-Trust card 5.4) use the CardOS6.0 operating system. As of late 2023, they are offered with a validity period of up to 3 years. Before using cards from the 5.x generation, please check their compatibility with your application software. Your card reader may require a firmware update.</div><div></div><div></div><div>The seal card is only used once to add a seal to the company registration information stored with EPREL and thereby confirm it. This seal is required both for newly added companies, as well as for companies that have been registered with EPREL for a while. The company information whose origin and identity are confirmed in this way are stored in the EPREL database.</div><div></div><div></div><div>A standard signature or seal card is designed for individual signatures for each PIN entry in the workplace. Batch and multi cards differ from standard cards as they allow for multiple signature processes with a one-time PIN entry.</div><div></div><div></div><div>D-Trust multi-sign cards are secured environments, such as server rooms. f you need multiple signatures in your office, please use the D-Trust Card M100 for batch signatures of up to 100 per PIN entry.</div><div></div><div></div><div>Unlike a signature card, the certificates of a seal card are issued to a legal entity (e. g. a public agency or organisation). Since no natural person is named in the seal card certificate, a seal card can be used by all authorised employees. Seal cards are always used when a stamp or confirmation by an organisation is required (e. g. certificates, notices, etc.).</div><div></div><div> df19127ead</div>