Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss
Button Control Help
1 view
Skip to first unread message
Northwest Upgrades Plus
Jun 17, 2009, 11:02:01 PM6/17/09
to
I have written some code that enables me to control 2 servo motors on a Basic
Stamp connected via a serial port. That part was doable using Trackbars.
However, I want to expand it a bit by adding a stepper motor pushbutton
control Is there an easy way to do this, since I already have the port open?
What I want to do is have the button send a Pulsout command to a specific
port on the Basic Stamp when pressed. Thanks if anyone can help.
--
Thanks for your help.
Stamp connected via a serial port. That part was doable using Trackbars.
However, I want to expand it a bit by adding a stepper motor pushbutton
control Is there an easy way to do this, since I already have the port open?
What I want to do is have the button send a Pulsout command to a specific
port on the Basic Stamp when pressed. Thanks if anyone can help.
--
Thanks for your help.
0 new messages