DTM: USB-IF test certification ID check
dmm
set to zero. When I run this test in the DTM, the log reports an error: "No
valid USB IF test ID has been entered."
I am testing with WLK 1.5. There is some buzz on the Internet that WinQual
has a method by which to generate a Test ID that works with WLK 1.5, but I
can find nothing helpful on their site.
Any ideas?
Thanks
dmm
Tim Roberts
>
>MSDN Document "USB-IF Test Certification ID Check" indicates the TESTID be
>set to zero.
No, it doesn't. The menu shows that the test ID starts out as 0, but
you're supposed to enter the ID that you got from running the USB
compliance tests.
>I am testing with WLK 1.5. There is some buzz on the Internet that WinQual
>has a method by which to generate a Test ID that works with WLK 1.5, but I
>can find nothing helpful on their site.
You have to run the USB compliance tests from the USB Implementor's Forum,
and enter the test ID number that the compliance tests give you. In WLK
1.4, the compliance tests were run as part of the test suite. In WLK 1.5,
they originally expected you to go to a certificate USB testing company to
get the ID. They've now decided to go back to the original scheme of
including the tests in WLK, but for now I believe you'll have to get the
test from www.usb.org and run them yourself.
Perhaps you should contact WHQL. In light of the confusion, perhaps they
have a procedure for getting a variance.
--
Tim Roberts, ti...@probo.com
Providenza & Boekelheide, Inc.
Ming
USB-IF?
Thanks
"Tim Roberts" wrote:
> .
>
Tim Roberts
>
>How to get this USB compliance test suit, it's free? or I have to buy it from
>USB-IF?
I believe you need the tests here:
http://www.usb.org/developers/tools
However, the whole thing is so much in flux, you should probably contact
Winqual for the definitive information.
Lukas@discussions.microsoft.com Stacy Lukas
downloaded the certification test from USB.org but it does not seem to
generate an ID that we can see.
Regards,
Stacy Lukas
"Tim Roberts" wrote:
> .
>
Myers@discussions.microsoft.com Chris Myers
the Compliance Test for the Chapter 9 Suite, see everything pass, but I can't
find a test ID anywhere.
Chris Myers
normbailey
To quote a portion of the erratum description:
"Errata 1797 The USB-IF Test Certification ID Check test
will be modified or removed in a future WLK release.."
Cheers
Chris Myers wrote:
I am stuck at the same point. I downloaded the USB20CV R1.3.5.
29-Jan-10
I am stuck at the same point. I downloaded the USB20CV R1.3.5.5 package, ran
the Compliance Test for the Chapter 9 Suite, see everything pass, but I cannot
find a test ID anywhere.
Chris Myers
"Stacy Lukas" wrote:
Previous Posts In This Thread:
Submitted via EggHeadCafe - Software Developer Portal of Choice
ASP.NET Client-Side Script FAQ (work in progress)
http://www.eggheadcafe.com/tutorials/aspnet/90e8e4ec-3e9a-4cb0-92ef-a172f1fd25c1/aspnet-clientside-scrip.aspx
黃博生
wrote:
> Does anyone know how to get the ID needed to pass this WHQL test? We
> downloaded the certification test from USB.org but it does not seem to
> generate an ID that we can see.
>
> Regards,
> Stacy Lukas
>
>
>
> "Tim Roberts" wrote:
>
> > >How to get this USB compliance test suit, it's free? or I have to buy it from
> > >USB-IF?
>
> > I believe you need the tests here:
> > http://www.usb.org/developers/tools
>
> > However, the whole thing is so much in flux, you should probably contact
> > Winqual for the definitive information.
> > --
> > Providenza & Boekelheide, Inc.
> > .- 隱藏被引用文字 -
>
> - 顯示被引用文字 -
To get a USB test ID, you have to submit a test requirement to USB-IF
qualified lab, you can find the test labs here http://www.usb.org/developers/compliance/labs/
Steven Huang
2010-03-09 am
Sharan
After some searching I found out that that the USB-IF Test Certification ID Check is no longer required. So, the result of the test doesn't matter as the test is filtered in WLK 1.5.
After running the test(s), download the WLK filters(updatefilters.cab) from the winqual website and follow the procedure to update the filters. If you view the result now, the test result will be filtered.
Hope this post helps someone in the future.
Good luck!
PS:Someone above has told the same thing.
??? wrote:
On 1=E6=9C=8828=E6=97=A5, =E4=B8=8A=E5=8D=881=E6=99=8230=E5=88=86, Stacy
08-Mar-10
On 1=E6=9C=8828=E6=97=A5, =E4=B8=8A=E5=8D=881=E6=99=8230=E5=88=86, Stacy Lu=
wrote:
e
it from
t
To get a USB test ID, you have to submit a test requirement to USB-IF
qualified lab, you can find the test labs here http://www.usb.org/developer=
s/compliance/labs/
Steven Huang
2010-03-09 am
Previous Posts In This Thread:
On Wednesday, December 23, 2009 3:43 PM
dmm wrote:
DTM: USB-IF test certification ID check
MSDN Document "USB-IF Test Certification ID Check" indicates the TESTID be
set to zero. When I run this test in the DTM, the log reports an error: "No
valid USB IF test ID has been entered."
I am testing with WLK 1.5. There is some buzz on the Internet that WinQual
has a method by which to generate a Test ID that works with WLK 1.5, but I
can find nothing helpful on their site.
Any ideas?
Thanks
dmm
On Saturday, December 26, 2009 7:11 PM
Tim Roberts wrote:
No, it does not.
No, it does not. The menu shows that the test ID starts out as 0, but
you are supposed to enter the ID that you got from running the USB
compliance tests.
You have to run the USB compliance tests from the USB Implementor's Forum,
and enter the test ID number that the compliance tests give you. In WLK
1.4, the compliance tests were run as part of the test suite. In WLK 1.5,
they originally expected you to go to a certificate USB testing company to
get the ID. They've now decided to go back to the original scheme of
including the tests in WLK, but for now I believe you will have to get the
test from www.usb.org and run them yourself.
Perhaps you should contact WHQL. In light of the confusion, perhaps they
have a procedure for getting a variance.
--
Tim Roberts, ti...@probo.com
Providenza & Boekelheide, Inc.
On Thursday, January 07, 2010 3:20 PM
Ming wrote:
How to get this USB compliance test suit, it is free?
How to get this USB compliance test suit, it is free? or I have to buy it from
USB-IF?
Thanks
"Tim Roberts" wrote:
On Friday, January 08, 2010 12:53 AM
Tim Roberts wrote:
I believe you need the tests here:http://www.usb.
I believe you need the tests here:
http://www.usb.org/developers/tools
However, the whole thing is so much in flux, you should probably contact
Winqual for the definitive information.
--
Tim Roberts, ti...@probo.com
Providenza & Boekelheide, Inc.
On Wednesday, January 27, 2010 12:30 PM
Stacy Lukas wrote:
Does anyone know how to get the ID needed to pass this WHQL test?
Does anyone know how to get the ID needed to pass this WHQL test? We
downloaded the certification test from USB.org but it does not seem to
generate an ID that we can see.
Regards,
Stacy Lukas
"Tim Roberts" wrote:
On Friday, January 29, 2010 5:22 PM
Chris Myers wrote:
I am stuck at the same point. I downloaded the USB20CV R1.3.5.
I am stuck at the same point. I downloaded the USB20CV R1.3.5.5 package, ran
the Compliance Test for the Chapter 9 Suite, see everything pass, but I cannot
find a test ID anywhere.
Chris Myers
"Stacy Lukas" wrote:
On Thursday, February 04, 2010 5:27 AM
Norm Bailey wrote:
Download the DTM errata filters to solve this problem
This issue has been addressed by an erratum filter for the DTM. Download the filters by clicking on the WLK Updated Filters link in the "Helpful Links" section on the Winqual home page. Open the .cab and follow the readme.
To quote a portion of the erratum description:
"Errata 1797 The USB-IF Test Certification ID Check test
will be modified or removed in a future WLK release.."
Cheers
On Monday, March 08, 2010 10:03 PM
??? wrote:
On 1=E6=9C=8828=E6=97=A5, =E4=B8=8A=E5=8D=881=E6=99=8230=E5=88=86, Stacy
On 1=E6=9C=8828=E6=97=A5, =E4=B8=8A=E5=8D=881=E6=99=8230=E5=88=86, Stacy Lu=
wrote:
e
it from
t
To get a USB test ID, you have to submit a test requirement to USB-IF
qualified lab, you can find the test labs here http://www.usb.org/developer=
s/compliance/labs/
Steven Huang
2010-03-09 am
Submitted via EggHeadCafe - Software Developer Portal of Choice
Distributed Data Grids - Share Objects Between Windows Service and ASP.NET
http://www.eggheadcafe.com/tutorials/aspnet/953ed61f-e440-4ca5-8b7a-1bb00e33db07/distributed-data-grids-.aspx
Sharan
After some searching I found out that that the USB-IF Test
Certification ID Check is no longer required. So, the result of the
test doesn't matter as the test is filtered in WLK 1.5.
and follow the procedure to update the filters. If you view the result
Good luck!