Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss
Serial Device Error on start-up
0 views
Skip to first unread message
Greg Hunter
Nov 9, 2000, 3:00:00 AM11/9/00
to
I have SBS 4.5 and have recently changed out modems. I had quite a few
problems with the ports and drivers, but finally got the new modem to work.
While everything is apparantly working fine, I continue to get an error
message on every re-start with the following message in the Event Viewer.
I've searched the Microsoft knowledge base with no success. ANY ideas would
be greatly appreciated!
problems with the ports and drivers, but finally got the new modem to work.
While everything is apparantly working fine, I continue to get an error
message on every re-start with the following message in the Event Viewer.
I've searched the Microsoft knowledge base with no success. ANY ideas would
be greatly appreciated!
thanks!
Event ID: 7000
Source: Service Control Manager
Type:Error
Category: None
The ptserial service failed to start due to the following error:
No serial device was successfully initialized. The serial driver will
unload.
![Grey Lancaster [MS MVP SBS]'s profile photo](http://lh3.googleusercontent.com/a-/ALV-UjXIAfwhNdpttgIe5mgrUSqWoLB7wL3SshmTlbUo_sciPPc4IHMy=s40-c)
Grey Lancaster [MS MVP SBS]
Nov 9, 2000, 3:00:00 AM11/9/00
to
Not sure what ptserial is. Look in cp, devices and disable it and you will
not get the error
not get the error
Grey
"Greg Hunter" <r...@r.com> wrote in message
news:MZxO5.10112$8F.6...@news4.atl...
0 new messages