Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss
Teaming two Ethernet Ports
1 view
Skip to first unread message
Jessica Patla
Jul 24, 2013, 8:59:29 AM7/24/13
to
Hello,
I am trying to create a Team in Microsoft Embedded XP. I am able to get one Network card to join the Team and I can set this card as the Priority, however, when I try to have the second Ethernet join the team, I cannot set it as the secondary. I get an IP Address (192.168.0.101) on ETH1 and the other one is active but (of course not communicating) when I pull the plug on ETH2, both become disabled.
The cards themselves are as followed:
Working (ETH1...joins the network and gets an IP)
Board is 82583V-3 Intel Gigabit NIC with Driver e1y5132
Non-Working (ETH2...shows to have joined the team but does not react that way)
Board is 82583V Intel Gigabit NIC with Driver e1q5132
Any help or link to another site would be appreciated. I cannot seem to find if the chips even support Teaming.
I am trying to create a Team in Microsoft Embedded XP. I am able to get one Network card to join the Team and I can set this card as the Priority, however, when I try to have the second Ethernet join the team, I cannot set it as the secondary. I get an IP Address (192.168.0.101) on ETH1 and the other one is active but (of course not communicating) when I pull the plug on ETH2, both become disabled.
The cards themselves are as followed:
Working (ETH1...joins the network and gets an IP)
Board is 82583V-3 Intel Gigabit NIC with Driver e1y5132
Non-Working (ETH2...shows to have joined the team but does not react that way)
Board is 82583V Intel Gigabit NIC with Driver e1q5132
Any help or link to another site would be appreciated. I cannot seem to find if the chips even support Teaming.
0 new messages