Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss
Help, collision non-stop at hub after login to NT4.0 (server)
0 views
Skip to first unread message
gay...@hongkong.com
Jul 20, 2000, 3:00:00 AM7/20/00
to
Hello all,
Could you help me solve this problem ?
TCP/IP protocol address -> 192.168.0.1
mask -> 255.255.255.0
gateway -> 192.168.0.1
And IPX , WINS , Netbios , also used in my NT4.0 server system.
Could you help me solve this problem ?
TCP/IP protocol address -> 192.168.0.1
mask -> 255.255.255.0
gateway -> 192.168.0.1
And IPX , WINS , Netbios , also used in my NT4.0 server system.
¤j¤O¯«
Jul 20, 2000, 3:00:00 AM7/20/00
to
I have this non-stop collision in my LAN (Peer-peer) just now and was
advised to check if the LAN Ethernet Card has Full Duplex enabled.
advised to check if the LAN Ethernet Card has Full Duplex enabled.
I have this resolved because of this feature disabled, causing non-stop
collision on LAN Hub and traffic.
Try your luck!!!!
Daliksan.
+++
0 new messages