MicropendousX-1343 refresh
15 views
Skip to first unread message
BobC
Jun 14, 2012, 5:27:18 PM6/14/12
to microp...@googlegroups.com
Hi all,
I recently needed a 1343 board, so I got some MicropendousX-1343 boards made from batchpcb. I discovered that some parts are hard to source in the UK (mainly the USB connector), and also during construction found a few things difficult to solder, e.g. the SD card holder, and the buttons.
So I did a minor refresh to use some different parts, I have put the project here https://github.com/bobc/bobc_hardware. For the moment, I removed the SD card holder. I am afraid I have lost some of the quality of Matt's original work, I have not had any new boards made yet. I trimmed the size to 50mm, so that I can get it made through Seeedstudio or Iteadstudio service.
There is also a sample firmware project based on the Microbuilder.eu code base.
There are a couple of other LPC1343 designs out there, notably USBug, but I still like the MicropendousX-1343 design.
I recently needed a 1343 board, so I got some MicropendousX-1343 boards made from batchpcb. I discovered that some parts are hard to source in the UK (mainly the USB connector), and also during construction found a few things difficult to solder, e.g. the SD card holder, and the buttons.
So I did a minor refresh to use some different parts, I have put the project here https://github.com/bobc/bobc_hardware. For the moment, I removed the SD card holder. I am afraid I have lost some of the quality of Matt's original work, I have not had any new boards made yet. I trimmed the size to 50mm, so that I can get it made through Seeedstudio or Iteadstudio service.
There is also a sample firmware project based on the Microbuilder.eu code base.
There are a couple of other LPC1343 designs out there, notably USBug, but I still like the MicropendousX-1343 design.
Reply all
Reply to author
Forward
0 new messages