HELP -- LPC1768 hex/bin/elf file with USB working
62 views
Skip to first unread message
Casainho
Jul 20, 2010, 5:15:41 PM7/20/10
to microp...@googlegroups.com
I am looking for a hex/bin/elf file with USB working on LPC1768. My board do not works with the code I did build however I don't know if the problem is because my board or my firmware.
The code shared o Micropendousx do not builds on my PC because of some errors...
Thanks in advance.
--
Cumprimentos,
Jorge Pinto
The code shared o Micropendousx do not builds on my PC because of some errors...
Thanks in advance.
--
Cumprimentos,
Jorge Pinto
Opendous Support
Jul 21, 2010, 8:52:36 AM7/21/10
to MicropendousX
Try the older CodeSourcery release 2009q3-68:
http://www.codesourcery.com/sgpp/lite/arm/portal/release1033
Loading the compiled firmware fails for me as well when using the
2010q1-188 CodeSourcery release.
Casainho
Jul 21, 2010, 11:33:17 AM7/21/10
to microp...@googlegroups.com
On Wed, Jul 21, 2010 at 1:52 PM, Opendous Support <opendous...@gmail.com> wrote:
Try the older CodeSourcery release 2009q3-68:
http://www.codesourcery.com/sgpp/lite/arm/portal/release1033
Loading the compiled firmware fails for me as well when using the
2010q1-188 CodeSourcery release.
Ok, I changed for CodeSourcery release 2009q3-68 but I still get nothing working :-(
If you have a working elf/bin/hex file, please send to me.
Opendous Support
Jul 22, 2010, 4:27:33 PM7/22/10
to MicropendousX
On my LPC1758 board I am able to compile and load the firmware using
2009q3-68.
However, I am unable to load the firmware onto a LPC1768-based board.
Blinky works on that board but not anything larger.
I did all my development on the LPC1758 and it does not appear to work
out-of-the-box on the LPC1768.
On Jul 21, 3:33 pm, Casainho <casai...@gmail.com> wrote:
> On Wed, Jul 21, 2010 at 1:52 PM, Opendous Support <
>
2009q3-68.
However, I am unable to load the firmware onto a LPC1768-based board.
Blinky works on that board but not anything larger.
I did all my development on the LPC1758 and it does not appear to work
out-of-the-box on the LPC1768.
On Jul 21, 3:33 pm, Casainho <casai...@gmail.com> wrote:
> On Wed, Jul 21, 2010 at 1:52 PM, Opendous Support <
>
Casainho
Jul 26, 2010, 2:45:39 PM7/26/10
to microp...@googlegroups.com
Matt, to tell you what we decided and why:
For boards with LPC17xx we should be able to make our boards so we will always make our custom board and not base board + secondary, because it would be more expensive.
For boards with imx233 we will use the base board because we can't make such board, because of SDRAM.
For LPC17xx we would like to have an Arduino were we could go to use the firmware libs, something we can't do with Mbed. So we could at least help sharing code for LPC17xx, were everyone could win from that.
We don't think we can compete with Mbed and other kinds of boards/companies trying to do the "Arduino V2".
Right now I will continue to try mill a 2.5mm tracks. Also see if is possible to plot such tracks. I want to finally be able to make Lyre LCD + buttons board.
For boards with LPC17xx we should be able to make our boards so we will always make our custom board and not base board + secondary, because it would be more expensive.
For boards with imx233 we will use the base board because we can't make such board, because of SDRAM.
For LPC17xx we would like to have an Arduino were we could go to use the firmware libs, something we can't do with Mbed. So we could at least help sharing code for LPC17xx, were everyone could win from that.
We don't think we can compete with Mbed and other kinds of boards/companies trying to do the "Arduino V2".
Right now I will continue to try mill a 2.5mm tracks. Also see if is possible to plot such tracks. I want to finally be able to make Lyre LCD + buttons board.
Reply all
Reply to author
Forward
0 new messages