SourceTree for Windows 1.0 (Mercurial対応)

150 views
Skip to first unread message

Kaz Nishimura

unread,
Jun 27, 2013, 5:22:47 AM6/27/13
to mercur...@googlegroups.com
窓の杜の記事で気がつきましたが、Mercurialに対応したSourceTree for Windowsのバージョン1.0がリリースされた模様です。

http://blog.bitbucket.org/2013/06/26/sourcetree-1-0-released-now-with-mercurial-support/
(最初のダウンロードボタンは画像ファイルにリンクしているだけなので注意)

TortoiseHgとはかなり趣が違うようなので、しばらくはいろいろ試してみようと思います。

Katsunori FUJIWARA

unread,
Jul 3, 2013, 3:07:26 AM7/3/13
to mercurial-ja
藤原です。

Twitter 上で SourceTree for Windows をダウンロードして使用してみた
方の情報が見られますが、初物(笑)にありがちな『思わぬトラブル』も散
見されます。

とりあえず要点をまとめると:

  ● 最新の 1.0.4 版以降をインストールすべし

  ● Mercurial の設定ファイルが改変される可能性があるので、
     TortoiseHg や CUI 版と併用している場合は、要注意

以下、私が目にした範囲でまとめておきますので、使用する方はご注意く
ださい。


  ● eol エクステンションが自動的に有効になる

    複数の方によって確認されています。

    eol 有効化と一緒に、encode/decode セクションへの
    cloverencode/decode 設定も追加する模様です。

    # この設定形式は非推奨

    最新の release note によると、1.0.4 で修正されたみたいですが、
    1.0.3 以前の版をインストールされた方は、追加された設定はそのま
    まになりますから、注意してください。

        Don't configure encode/decode settings when enabling eol
        extension any more, has confused some users with existing
        repos with native CRLFs.

    eol エクステンションを無効にすると、cloverencode/decode を使っ
    た設定が『不正設定』状態になるので、encode/decode セクションの
    設定削除も忘れないようにしてください


  ● win32mbcs 併用時の問題

    利用者から、同一環境で TortoiseHg 等による clone が成功する状
    況で、ファイル名不正による clone 失敗が発生する、という報告を
    受けました。

    再現性/原因等は未確認なため、私も調査してみますが、情報をお持
    ちの方(上手く行っている/問題が再現する etc)は是非お寄せくださ
    い。


  ● 1.0 リリース以降に複数の比較的大きな修正が入っている

    最新の release note によると、現時点で最新の 1.0.4 には、
    Mercurial 固有のものだけで以下の修正が含まれています。

    トップページ等からリンクから辿った場合は 1.0.4 がダウンロード
    されるみたいですが、以前ダウンロードしたものを使用する場合など
    は、極力最新版に更新したほうが良いでしょう。

    @ 1.0.4
    - Allow extra builtin extensions like largefiles to be
      enabled in Tools > Options > Mercurial
      (設定画面で一部エクステンションの有効化が出来なかったものの改善)

    - When incoming / outgoing fails in hg because of SSH auth
      error make sure we prompt to load Pageant etc rather than
      just display 'nothing to push/pull' (SRCTREEWIN-720)

    - Don't configure encode/decode settings when enabling eol
      extension any more, has confused some users with existing
      repos with native CRLFs.

    @ 1.0.3
    - Fix failure to detect Mercurial repo type when trying to
      clone via SSH (SRCTREEWIN-689)

    @ 1.0.2
    - Fix crash when Mercurial repo has a subversion
      subrepository (SRCTREEWIN-670)

    @ 1.0.1
    - Fix a packaging issue which could cause Mercurial support
      not to work



2013年6月27日 18:22 Kaz Nishimura <kaz...@vx68k.org>:

--
--
from Mercurial 日本語コミュニティ <mercur...@googlegroups.com>
※ ヘルプ表示は http://groups.google.com/group/mercurial-ja?hl=ja
---
このメールは Google グループのグループ「mercurial-ja」の登録者に送られています。
このグループから退会し、メールの受信を停止するには、mercurial-ja...@googlegroups.com にメールを送信します。
その他のオプションについては、https://groups.google.com/groups/opt_out にアクセスしてください。
 
 



--
----------------------------------------------------------------------
FUJIWARA Katsunori(flying...@gmail.com)
Reply all
Reply to author
Forward
0 new messages