[MEMS SPI 1996] Problem to connect

[Ciancianis]

hello to all,
currently i have a problem to connect all the software on windows or osx to access the ECU.
The drivers are correctly installed but still errors on the different software.
Do you have a way to connect the computer? ignition off? engine on?
connected to ecu ({"Connected":false, "ECUID":"", "ECUSerial":"", "IACPosition":0})
thank you for your answer

[Andrew Jackson]

It’s probably your cable. You need to get one rovermems.com or from NLA Classic Minis

[rubenste...@gmail.com]

Hi, Andrew,

I wonder how Ciancianis got on: his post is well over 2 years’ old, and I don’t recall seeing it first time around.     I hope he replies to you and tells us if hr resolved the issue.   Perhaps it was something as simple as specifying the correct port to connect to?

Martin

[Andrew Jackson]

Hi Martin,

Let’s hope so. My money is on the cable rather than the port. I’ve had dozens of people over the years  with a similar issue using cables that use an inferior chip. My advice is to get one from James or Roger as these are good quality..

Andrew

[rubenste...@gmail.com]

Too right: I wish James or Roger had been selling them when I made mine: I would far rather have bought one of sound quality than had all the faffing around making my own, and then wondering, first time I connected, was the problem in the cable or elsewhere.