Don't Trust Lux Ratings by John Honovich, IPVM posted on Jan 10, 2013
Philip George TelExcell
Do not trust lux ratings. Do not use lux ratings to specify cameras. Period.
Lux ratings are widely, and unfortunately, used to define low light performance, with the lower the lux rating, the stronger low light performance. For instance, a camera with 0.0001 lux is supposedly 'better' in low light than a camera with 0.001 lux.
However, they are so riddled with fundamental problems that lux ratings must be abandoned.
Widespread Misconception
In regular IPVM assessments, we find easily half of surveillance professionals believe and use lux ratings as a viable metric for assessing low light performance.
More importantly, lux ratings are overwhelmingly used in RFPs to require specific low light performance. Cameras that do not meet the RFPs lux ratings specification are rejected.
The Fundamental Problems
Here are the fundamental problems:
- Unrealistic numbers
- No standard process
- No revelation of what image looks like
- Failure to disclose camera settings
- Gradual image quality decline
Unrealistic Numbers
Most manufacturers have lux ratings that are incredibly unrealistic, with ratings of .001 lux or lower common. However, that is incredibly dark. Almost any camera truly in such conditions in the real world would capture nothing or be so dark and noisy as to be practically useless.
No Standard Process
Each manufacturer measures on their own, by themselves and with whatever 'standards' that they like. As such, it is impossible to compare the results of two manufacturers without more knowledge or testing of one's own.
No Revelation of What Images Look Like
No manufacturer ever releases images of what their cameras look like at their claimed lux ratings. Almost certainly, the images would be terrible.
Failure to Disclose Camera Settings
Many manufacturers use tricky settings such as using super slow shutters and fostering tricks like 'sens up'. Often they will obscure this in their specification, resulting in seemingly eye popping low lux ratings like 0.000001 lux.
Gradual Image Quality Degradation
The image quality of all cameras gradually declines as light levels fall below 50 lux, with falling signal to noise ratios, and increasing gain control levels. There is no magical point where quality turns from good to bad.
Consultant's Fault
The lion's share of the blame goes to consultants who regularly specify cameras based on minimum illumination specifications though they rarely if ever test to verify that the ratings are accurate.
Manufacturer's Trapped
This creates an ugly system where even the most ethical and responsible manufacturers are trapped. The first manufacturer to 'tell the truth' about their low light performance will be disqualified from many large projects. Because of this, no one can afford to do so.
Worse, it rewards the most unscrupulous vendors who realize that they are rarely, if ever, are called on their specs.
What To Do?
The best way is to test cameras head to head in the same conditions with the same fundamental settings (especially shutter speed). For example, see our MP low light shootout. Take your finalists and place them for an evening in your desired deployment location. I can almost guarantee that the results will not match what the lux ratings suggest.
Short of that, a few specifications do deliver:
- F Stop: While small differences in F numbers (1.2 vs 1.4) have limited practical impact, going from F1.2 vs 2.4 typically has a major impact on low light quality.
- Adding IR: If a scene is quite dark and you want to ensure maximum illumination, consider adding IR either through integrated IR or add-on illuminators.
There is no magic number. Unfortunately, lux ratings are voodoo, more smoke and mirrors than reality. Let's move past them and focus on better metrics for reliably specifying high quality low light performance.
33, Yusuf Sarai, Green Park Extension
New Delhi - 110016
Ph - +91-11-26814626-30, Fax - +91-11-46524721