Re: [MT-L] 5.64 AutoVerification with Meditech Calculations

[Perdue, Judy M.]

Hello All:

        I am looking for information on auto verification with using the medication calculation.   I found some old emails out there on Meditech-L that say this will work as long as it is in the channel name. 

        I did get Meditech to calculate however it did not verify the calculation portion of the test even though in my analyzer type dictionary the Verify field was set to Y.

        Has anyone been able to utilize the Meditech calculations for auto verification and have the result go to COMP, if so any help would be appreciated.

 

Judy Perdue

Laboratory, LIS Analyst

Central Vermont Medical Center

Phone: 802-371-4404

Fax:  802-371-5348

email: judy....@cvmc.org

 

[Scherer, Paul]

Hi Judy,
You will need to add a _"\FV" command to the last line of your calculations to file and verify it.

The F(file) may not be necessary if you have autofile set to Y in the Analyze Type dictionary.

For example, the last line in the anion gap calculation may be something like this:

NA-(CL+CO2)};

After adding the command it would look like this:

NA-(CL+CO2)_"\V"};


Paul Scherer
Laboratory Information System Manager
ECMC, Department of Laboratory Medicine
(716) 898-3493 [direct]




--------------------------------------------------
Date: Tue, 16 Oct 2012 17:35:05 +0000
From: "Perdue, Judy M." <Judy....@cvmc.org>
To: "medit...@mtusers.com" <medit...@mtusers.com>
Subject: Re: [MT-L] 5.64 AutoVerification with Meditech Calculations
Message-ID:
<AAB3F18CBD300544B85...@CVMC-EMAILMBX2.CVMC.ORG>
Content-Type: text/plain; charset="us-ascii"

===###===###===###===###===###===###===
To unsubscribe from the meditech-l, follow the instructions at the URL http://mtusers.com/mailman/options/meditech-l_mtusers.com/

Please do NOT send messages that ask "Please post to the list" or "I'd like to see your answers" or "Send that info to me, too" These are useless messages that just waste the email server's resources. Instead, email the original requester and ask that they send you or post the results of their question.

Go to http://MTUsers.net for other information on the list, as well as:
1) reading meditech-l messages online
2) job opportunities
3) vendor products and service


Do NOT send email to meditech...@MTUsers.com. This is a system email box that is NOT monitored by a human. If you need help or advice on how to use the meditech-l, email lo...@MTUsers.com or ju...@MTUsers.net. Both of these people help manage the meditech-l, so they are your best resource.

===***===***===***===***===***===***===

[Libby Pascoe]

Hi
Add _"\V"; to the end of the calculation.
That should work for you.


Libby J Pascoe MT(AMT)
Georgetown Hospital System
LIS Analyst
(843)520-8219 GMH desk
(843)652-1397 WCH desk
lpa...@georgetownhospitalsystem.org
-----------------------------

Message: 3

Date: Tue, 16 Oct 2012 17:35:05 +0000
From: "Perdue, Judy M." <Judy....@cvmc.org>
To: "medit...@mtusers.com" <medit...@mtusers.com>
Subject: Re: [MT-L] 5.64 AutoVerification with Meditech Calculations
Message-ID:
<AAB3F18CBD300544B85...@CVMC-EMAILMBX2.CVMC.ORG>
Content-Type: text/plain; charset="us-ascii"


Hello All:
I am looking for information on auto verification with using the medication calculation. I found some old emails out there on Meditech-L that say this will work as long as it is in the channel name.
I did get Meditech to calculate however it did not verify the calculation portion of the test even though in my analyzer type dictionary the Verify field was set to Y.
Has anyone been able to utilize the Meditech calculations for auto verification and have the result go to COMP, if so any help would be appreciated.

Judy Perdue
Laboratory, LIS Analyst
Central Vermont Medical Center
Phone: 802-371-4404
Fax: 802-371-5348
email: judy....@cvmc.org

NOTE:
The information contained in this message may be privileged, confidential and protected from disclosure. If the reader of this message is not the intended recipient, or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by replying to this message and deleting it from your computer.
Thank you.

[Kerry Minow]

Each "T" test involved in calculation has to be defined in the analyzer type dictionary, along with the actual test where the calculation result will reside.
For example,
For Bun/Creatinine ratio, must define BUN, CREA and the B-C test as channels.


Kerry Minow
LIS Administrator
Elmhurst Memorial Hospital
155 E Brush Hill Rd
Elmhurst, IL 60126
331-221-0658
kmi...@emhc.org




The information contained in this electronic mail transmittal is
protected by law and is intended only for the use of the designated
recipient(s) named above. If the reader of this transmission is not
the intended recipient(s), you are notified that any disclosure,
dissemination, distribution or duplication of its contents is
strictly prohibited. If you have received this transmittal in
error, please notify the sender by return e-mail and delete the
transmittal immediately. Thank you.