Clean installation and no watts received from sensor 0. Only temperature

[carbone...@gmail.com]

After some days trying to solve this problem, I post to the group.

I followed these instructions https://github.com/lalelunet/measureit/wiki/Help---FAQ#does-my-system-receive-data-from-my-currentcost-device-something-is-not-working-why-not-how-do-i-get-debug-information

And when I turn on in debug mode /usr/bin/python /web/measureit/measureit_system_files/python/data-input.py debug

the console reports this data.... looks like the data is corrupted? 

Any suggestion?

Thanks in advance

[Thomas]

Looks like corrupted data. I have seen this problems with a self soldered cable I try to use with the CC device. 

Have you tried to stop and start the CC device?

You can also try to paste the output into a file to make sure it is not the display that let the data looks broken.

/usr/bin/python /web/measureit/measureit_system_files/python/data-input.py debug > /tmp/test.txt

After some time you cat take a look at the data in the file.

cat /tmp/test.txt

[carbone...@gmail.com]

I tried the same SD in another raspberrypi, and now the data looks unbroken

But current Watt still shows 0

At debug console I see that data on ch1 is 0, but on ch3 is the correct one.

So, is this something I can fix with setup tab?

Can't find where I can set set channel on sensor 0

Thomas, thanks for your fast answers and congratulations for this project

El dissabte, 13 octubre de 2018 12:18:01 UTC+2, Thomas va escriure:

[carbone...@gmail.com]

well, the clamb was plugged on hole 3.... so i plugged on hole 1 and now data is ok!

Conclusions: 

1) I had something wrong with the first Raspeberrypi, maybe some hardware issue.

2) the default configuration is for sensor 0 with clamp plugged on position 1

now it's time lo log, analize, and change my behaviours in order to become  more "green"

Thanks Thomas! 

[Thomas]

:)

Nice to hear that everything is working.