help with measureit on raspberrypi zero w

[Riccardo Azzoni]

Goodmorning,

I have an old current cost envir and I want to use measureit to send data to PVoutput.

I just bought a raspberrypi zero w and would like to use it.

Please consider that I have no experience with raspberry and linux.

The raspberry pi zero w came with a 16GB sd card with an OS already installed.

When I started it I got a prompt to look for updates and answered yes.

After the update the OS installed is the following

pi@raspberrypi:~ $ cat /etc/os-release

PRETTY_NAME="Raspbian GNU/Linux 10 (buster)"

NAME="Raspbian GNU/Linux"

VERSION_ID="10"

VERSION="10 (buster)"

VERSION_CODENAME=buster

I tried to do the measureit manual installation using the "dirty script" from this page

https://gitlab.com/lalelunet/measureit/blob/master/measureit_system_files/install/install-measureit-image.sh

I probably did something wrong or the procedure is not working with my OS version.

As far as I understand I should be able to see the envir data using a browser and typing the IP address of my raspberry (which I believe is correct as I got it from my router). However I got an error message "ERR_CONNECTION_REFUSED"

I kindly ask for suggestions: should I try to flash the card with the pre-installed measureit version 121?

I read that it should work on pi 3,2,1 and zero but don't know if it works with my pi zero w.

Anyway I tried to access this page but it's not working

https://gitlab.com/lalelunet/measureit/tags/121

Any other suggestion?

Thanks

Riccardo

[Riccardo Azzoni]

I was able to install the 121 release from this page

https://gitlab.com/lalelunet/measureit/-/releases

Everything works fine on my raspberrypi zero w.

Please do not consider the previous help request.

Thanks

Riccardo