Simplify3D Software Support MBot 3D Printers

[MBot3D]

After several months hard working on Creator 3D Printer software, now the creator 3d printing software can support most of 3d printers, MBot 3D Printers are supported now. So if you want to use creator as mbot 3d printer 's printing software, you can download it from here: 

http://www.simplify3d.com/creator/

With Sailfish's firmware, you can control the machine in the control panel.

---

Incredible Performance.

Stop waiting for your models to slice and start printing! Simplify3D Software has been written from the ground up using some of the most advanced, high-performance algorithms available. It is consistently 10x faster than the current generation slicers and offers a significant improvement in processing time. To put that in perspective, a model that would take 30 seconds to slice in Simplify3D Software would take over 5 minutes in another software package! Start printing in seconds, not minutes!

---

Revolutionary Features.

In addition to the standard 3D printing functions, Simplify3D Software pushes the limits of what has been done in the additive manufacturing world. We’re introducing an entirely new approach to support material that gives you complete control over the support placement while still being simple to use. Stop wasting time and plastic printing unnecessary material! We’re also simplifying how you create digital models by providing an add-in that can convert traditional 2D images into representative 3D parts.

---

Immersive Visualizations.

You are designing content in 3D, so shouldn’t your software work in 3D too? Simplify3D Software contains an impressive 3D framework for rendering your creations in beautiful detail. Once you generate a set of instructions for printing your parts, watch a detailed animated print preview that illustrates print speed, extrusion dimensions, retraction movements, and rapids. There isn’t a better method to preview your prints besides making them on the machine itself!

---

Powerful Integration.

Never use another piece of 3D-printing software again. Simplify3D Software contains everything you need to move from digital to physical parts, and then some! The software has been developed alongside existing hardware manufacturers to ensure a seamless experience when interacting with your G-Code driven 3D printer. Print from an SD card or stream files over your USB port. Manually control almost every aspect of your 3D printer or let the preconfigured profiles handle it for you.

---

Streamlined Workflows.

Move ideas from your imagination to a physical part in only a few clicks! The 3D printing workflows have been optimized to allow rapid printing with minimal hassle. Beginner users aren’t bombarded with unnecessary options, while pro users have the option to tweak as many settings as they wish. Focus on designing your content and stop wasting time trying to figure out how to operate your machine!

---

Support Documentation

Simplify3D Software contains a Quick Start Guide that walks through the entire printing process, beginning to end. Additional information, FAQs, and tutorials are also available on our Support Page to help you get the most capabilities out of your printer.

---

Simplify3D Software is an electronic download and instructions will be emailed to you immediately following your purchase. Click the “Order Now” button to begin the ordering process.

System Requirements: Intel Pentium 4 or higher processor, 2GB or more of RAM. Windows XP or greater, Mac OS X 10.6 or greater, Ubuntu Linux 12.10 or greater. OpenGL 1.2 capable system.

[Lolo Cortes]

---

payment is

[Mark Zachary]

I've a Grid II. I bought Simplify3D. I worked with product support at Simplify3D to help me configure it. From the beginning I'd say only 10% of what I tried to print printed correctly, if that. I have a Printrbot using Simplify3D and have no complaints. I not sure what's going on, because I have mixed problems. One problem I'm experiencing is; during the print the software seems to loose control of the z axis; drops it down and releases control over it. If it wasn't for my Printrbot, I'd say it was a waste of $140.00. Fortunately, I still have ReplicatorG to which my Grid II responds to correctly about ever other time. 

[Nico D]

Yeah, i've got a replicator clone (Flashforge) and i put in a Mbot mightboard and MF1 dual extruders (so basically mostly mbot now).

I bought Simplify3d based on Mbot's recommendation, I like the software but i can't get it to print anything stable. I'm back on makerware now which works way better. If i had a choice i wouldn't of wasted money on the simplify3D again. Doesnt' give you THAT much more functionality than makerware, especially if you edit your own config. 

[David Mestres Mairal]

Hi all,

I also purchased Simplify for my new Mbot Grid II,

I'm using the SIMPLIFY preconfigurated machine profile: Mbot Grid II. When trying to print with double extruder the Extruder goes to rear left side and hits the Bed. If I dont cancel it fast it'd brake. 

In the following forum happened the same:

The printer starts the proccess calibrating the level of bed, and in the second control point, rear-left side, the plate collides with the nozzle making noise like one piece hitting another, and we have to stop the proccess as quick as possible. Makes the same bad calibration than the MBOT GRID II printer selection. We don´t know how to successfully print with simplify3d

http://forums.mbot3d.com/t/several-serious-issues-in-mbot-grid-ii/139/30

Has anyone had the same issue? Or have a OK profile to export and share?

Many thanks!

El dimecres, 4 juny de 2014 16:41:13 UTC+2, WifiGuru10 va escriure: