560sec injector hold in place bracket

[Bogi Maramski]

Hi all,
I need 4 of the (injector hold in place bracket)
Install new injectors and one side brackets was over tight, so I apply force to remove them.
remove them but broken on pieces (see image) http://mymbsec.com/download/file.php?id=83
I install new injectors and for now I can run with no brackets, but I want to have them on place.

If you have these (including bolts) please respond
Thanks!

[Dick Spellman]

Bogi,

The nylon holders harden with heat/age and they will fall apart on removal of brass injector followed by use of right-angle pick to attempt removal of the holders.  These are only available from Mercedes dealerships.  Not a lot of money.  Best to contact your local Mercedes Benz stealership.

Dick

--
You are subscribed to the Google Groups "MBCoupes" group
To post to this group send email to mbco...@googlegroups.com
To unsubscribe send to mbcoupes+u...@googlegroups.com
For more options visit http://groups.google.com/group/mbcoupes
---
You received this message because you are subscribed to the Google Groups "MBCoupes" group.
To unsubscribe from this group and stop receiving emails from it, send an email to mbcoupes+u...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/mbcoupes/b90a5ecb-8b4d-443a-ad40-fa3eab2bc4c2%40googlegroups.com.

[Mike Ramay]

I have them, metal originals. Will get them out tomorrow and the bolts. No idea the value - make an offer I can't refuse. 

I'm in Las Vegas. They can go in a USPS Small Priority Box, postage around $7.

Mike Ramay
cell: (702) 494-8056

To view this discussion on the web visit https://groups.google.com/d/msgid/mbcoupes/3507d9b2-3d2d-180c-8ac7-96b0237e5674%40gmail.com.