M3 Crashes after 10m when building point cloud

70 views
Skip to first unread message

Mark Florquin

unread,
Apr 26, 2012, 6:34:03 AM4/26/12
to matheri...@googlegroups.com
I'm experiencing crashes when building the point cloud from video data:

 Problem Event Name: APPCRASH
  Application Name: Matherix3Dify.exe
  Application Version: 0.0.0.0
  Application Timestamp: 4f8d4b3b
  Fault Module Name: MSVCR90.dll
  Fault Module Version: 9.0.30729.6161
  Fault Module Timestamp: 4dace5b9
  Exception Code: 40000015
  Exception Offset: 0005beae

  Additional Information 1: 923d
  Additional Information 2: 923dfea070b5715c1120e609e996f663
  Additional Information 3: 7e20
  Additional Information 4: 7e202a867399e49ff6f571d352dfce27

Private Beta

unread,
Apr 26, 2012, 7:10:31 AM4/26/12
to matheri...@googlegroups.com
Can you send the copy of "logFile.txt" present in the folder where you saved the data from video?

Mark Florquin

unread,
Apr 26, 2012, 4:31:58 PM4/26/12
to matheri...@googlegroups.com


Logfile in attachment. I've noticed setting a higher interval reduces the crash occurences.
logFile.txt

Chytu

unread,
Apr 27, 2012, 12:42:54 AM4/27/12
to matheri...@googlegroups.com
Mark,

The logFile says that it cannot open Video capture from kinect at all.
  • Are you sure that this is the log file from the folder you selected for capture? When you said "while building point clouds", did you see any captured images at all?
  • If you saw images of the object while capturing, did you run another video capture to the same folder after that (the logFile gets overwritten if you do another operation in the same folder).
  • Finally, if you don't see anything while capture, make sure you are running 3Dify as Administrator as shown in the first few seconds of this video.
Thanks,
Chaitanya.
Reply all
Reply to author
Forward
0 new messages