Matherix stops recording after 00257 frames

62 views
Skip to first unread message

eleazar carmeli

unread,
Jun 28, 2012, 7:42:48 PM6/28/12
to matheri...@googlegroups.com
everytime i scan it says its recording over 257 frames but when i check the folder or open project it only shows 257

Dell prececison t7400
Dual Intel Xenon x540 
16gig ram 
dual NVidia Quadro FX4600

windows 7 64 enterprise 
kinect for xbox 

Chytu

unread,
Jun 29, 2012, 12:07:02 AM6/29/12
to matheri...@googlegroups.com
Can you send us the logFile.txt and settings.xml in the folder?

eleazar carmeli

unread,
Jul 2, 2012, 6:29:03 PM7/2/12
to matheri...@googlegroups.com


ok so i went through the log files  and it starts here

0, DEBUG, Mon Jul 2 15:24:07 2012, Kinect opening ...
1, DEBUG, Mon Jul 2 15:24:07 2012, MainWindow::updateUIFromGrabber()
2, DEBUG, Mon Jul 2 15:24:13 2012, done.
3, INFO, Mon Jul 2 15:24:13 2012,
Depth generator output mode:
FRAME_WIDTH    640
FRAME_HEIGHT   480
FRAME_MAX_DEPTH    10000 mm
FPS    30
FOCAL_LENGTH      575

4, INFO, Mon Jul 2 15:24:13 2012,
Image generator output mode:
FRAME_WIDTH    640
FRAME_HEIGHT   480
FPS    30

5, DEBUG, Mon Jul 2 15:24:13 2012, MainWindow::updateUIFromGrabber()
6, INFO, Mon Jul 2 15:24:13 2012,
Time per PRODUCER iteration:0.019002
7, INFO, Mon Jul 2 15:24:13 2012,  FPS:52.626148
8, INFO, Mon Jul 2 15:24:13 2012,  produced:0
9, INFO, Mon Jul 2 15:24:13 2012,  q_image_store:0
10, DEBUG, Mon Jul 2 15:24:13 2012, MainWindow::updateUIFromGrabber()
11, DEBUG, Mon Jul 2 15:24:13 2012, MainWindow::updateUIFromGrabber()
12, INFO, Mon Jul 2 15:24:13 2012,



and then ends in an error like this 

, MainWindow::updateUIFromGrabber()
5994, ERROR, Mon Jul 2 15:24:48 2012, ******====== Exception in Producer: ..\..\..\modules\core\src\alloc.cpp:52: error: (-4) Failed to allocate 614404 bytes
======******


i ran a test on this scan by just pointing at a wall and letting it run 



Chytu

unread,
Jul 3, 2012, 12:51:54 AM7/3/12
to matheri...@googlegroups.com
Ok. The problem seems to be that there is not enough memory to allocate after 257 frames. But, you said you had 16GB RAM right? Can you also make sure that there is enough memory in the disk drive you are storing the data?

Thanks,
Chytu.

eleazar carmeli

unread,
Jul 3, 2012, 11:34:04 AM7/3/12
to matheri...@googlegroups.com
i have 243gigs free , i tried placing the dir folder for the scans in a different folder on the c: instead of the desktop to see if that makes a difference it got to 689 frames recorded in the folder but the program stoped after 1023 frames , ,oddly ive tried this program on my other setup and ive got it to record almost 2k frames with out a hitch 


heres the log file ending  

Time per PRODUCER iteration:0.042000
6350, INFO, Tue Jul 3 08:29:56 2012,  FPS:23.809492
6351, INFO, Tue Jul 3 08:29:56 2012,  produced:1023
6352, INFO, Tue Jul 3 08:29:56 2012,  q_image_store:555
6353, DEBUG, Tue Jul 3 08:29:56 2012, MainWindow::updateUIFromGrabber()
6354, DEBUG, Tue Jul 3 08:29:56 2012, MainWindow::updateUIFromGrabber()
6355, ERROR, Tue Jul 3 08:29:57 2012, ******====== Exception in Producer: ..\..\..\modules\core\src\alloc.cpp:52: error: (-4) Failed to allocate 921604 bytes
======******

eleazar carmeli

unread,
Jul 3, 2012, 11:53:27 AM7/3/12
to matheri...@googlegroups.com
ok so i upped the page ram allocation to as high as i could go and i got it o run up to 1024 frames , is this the limitation of the program ?

heres the end of the log file 

Time per PRODUCER iteration:0.039008
6238, INFO, Tue Jul 3 08:49:59 2012,  FPS:25.635831
6239, INFO, Tue Jul 3 08:49:59 2012,  produced:1034
6240, INFO, Tue Jul 3 08:49:59 2012,  q_image_store:552
6241, DEBUG, Tue Jul 3 08:49:59 2012, MainWindow::updateUIFromGrabber()
6242, DEBUG, Tue Jul 3 08:49:59 2012, MainWindow::updateUIFromGrabber()
6243, ERROR, Tue Jul 3 08:50:00 2012, ******====== Exception in Producer: ..\..\..\modules\core\src\alloc.cpp:52: error: (-4) Failed to allocate 921604 bytes
======******

Chaitanya Nittala

unread,
Jul 4, 2012, 12:03:41 AM7/4/12
to matheri...@googlegroups.com
No. This is not a limitation of the program. We have tested it on a less powerful computer (core 2 duo with 3GB RAM) for over 2500 frames. But this seems like a bug - I will investigate further and provide a fix asap.

Can you send me the whole logFile.txt so that I can hope to reproduce the error here?

Thanks,
Chytu.

eleazar carmeli

unread,
Jul 4, 2012, 12:11:50 PM7/4/12
to matheri...@googlegroups.com
logFile.txt
Reply all
Reply to author
Forward
0 new messages