Material Certification 3.1 / 3.2/2.2--EIL India

[shaikh ahmed]

Dear Friends,

Please can you advise in which EIL Standard or API standard  to find the material certification requirement  EN3.1 or 3.2 or 2.2 for Pumps ( various components) in EIL Specification.

waiting for your response.

thanks.

Ahmed

[Dinesh Somwanshi]

Dear sir,

EN 3.1 MTC components  Certification basically based on review of test results.

EN 3.2 MTC components Certification basically based on witness of test results.  

Thanks & Regards

DINESH VITTHAL SOMWANSHI

BACHELOR IN MECHANICAL ENGINEER

AUTHORIZED PIPING / WELDING / NDT / PAINTING INSPECTION PERSONNEL
API 570 - Piping Inspector, AWS - CWI , CSWIP 3.1*,*BGAS  Gr 2 / 3
NDT II -UT , RT , MT , PT, VT
 00919881344135 India 
Skype = dinesh somwanshi

असो द्यावी दया तुमच्या लागतसे पाया.

*Pray for others, sometime, You might never need to pray for yourself
again.....*

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-weld...@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.

[Perumal Govindan]

Please refer BSEN 10204 for.more information

--

https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.

To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.

[shaikh ahmed]

Dear Experts,

Material Certification for PUMP components as per EIL Standard or API Standard  ( whether it is EN10204-3.1 / 3.2/2.2 for Pump components)

Please can you advise in which EIL Standard or API standard  to find the material certification requirement for Pump whether it is require   EN3.1 or 3.2 or 2.2 for Pumps various components in EIL Specification or API Standard

[Perumal Govindan]

Hi
Based on the criticality rating of the equipment's, the material certification requirements are decided.

Refer the pump MR (Maternal Specification), project purchase material specification / pump data sheet, there you can get the complete information.

Regards
P Govindan

[Perumal Govindan]

Hi

2.2 certification is a certificate contains  compliance of a product (COC) or un tested data of a product.

3.1 certification is a certificate contains the physical and chemical properties / performance tests are  tested at manufacturer laboratory or outside accredited laboratory and the tests are witnessed by the quality department of the manufacturer. Simple we can call as a manufacturer quality certificate.

3.2 certificate is a certificate contains all the physical & chemical properties / all the performance tests/FAT (Factory Acceptance Tests) are witnessed by both quality department personnel of the manufacturer and third party inspection agency's Inspector.

I hope above information clear about the certification levels.

Regards
P Govindan

To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.

Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.

--

https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.

To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.

[israr]

Hi 

Can any body respond at what stage an independent inspector witness material testing for certification of 3.2.?

[shaikh ahmed]

For Valve case it should be from Pouring to final test 

For Plate/Pipe- start from Raw material to final test

--

https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.

To unsubscribe from this group and stop receiving emails from it, send an email to materials-weld...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/f794a65b-0632-4fe1-b9e0-7ed4a33c9c5an%40googlegroups.com.