--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-weld...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAKH3OmtsQGJggFHLALaMyUJL%3DGzX2a3_zysrqKOz4n%2BvuFRs5A%40mail.gmail.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAPdGVmMW4YhYk0Jx%3DSJw-3vb7q30G-CYGb7S5%2BcW9vE3un6tTg%40mail.gmail.com.
Dear Saleem,
As per the AWS D1.1/D1.1M:2020 Structural Welding Code – Steel, the qualification range for a welder who qualifies on a 6" diameter pipe with a wall thickness of 10.97 mm using the specified electrodes (E6010 for root and hot pass, and E7018 for the fill and cap passes) would be as follows:
These ranges are determined based on the requirements set forth in AWS D1.1, which provides the necessary guidelines to ensure welders are properly qualified for a range of diameters and thicknesses beyond their test coupon. It is important to note that these qualification ranges are contingent on the specific procedure and test details as outlined in the AWS D1.1 code. Always refer to the latest edition of the code for the most accurate and detailed information.
--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-weld...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAKH3OmtsQGJggFHLALaMyUJL%3DGzX2a3_zysrqKOz4n%2BvuFRs5A%40mail.gmail.com.