Procedure for the welding Electrode testing

tejas kerzare

unread,

Apr 7, 2021, 7:44:32 AM4/7/21

to material...@googlegroups.com

Dear All,

Can you please provide me the procedure for welding electrode testing to weld seamless carbon steel pipe API 5L Grade B.

james gerald

unread,

Apr 7, 2021, 9:20:12 AM4/7/21

to material...@googlegroups.com

Normally procedure will be available for storage Conditioning and Handling of welding electrodes.

Welding electrode testing is available in ASME Sec.IIC.

If you want to be specific please provide the below details

1. Welding process

2. AWS Classification for eg like E 7018 etc..

3. Diameter of welding electrode

Thanks & Regards

J.Gerald Jayakumar

On Wednesday, 7 April, 2021, 05:14:28 pm IST, tejas kerzare <tejas.k...@gmail.com> wrote:

Dear All,

Can you please provide me the procedure for welding electrode testing to weld seamless carbon steel pipe API 5L Grade B.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-weld...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAPv03FuKVxo269jwyd%2B_%2BGy0h4KPqanPXiZQn-HbsCAb5LqKkA%40mail.gmail.com.

tejas kerzare

unread,

Apr 8, 2021, 11:15:01 PM4/8/21

to material...@googlegroups.com

1.Welding process - butt weld ( metal arc welding )

2.AWS Classification: E6010, E7010

3.Diameter of electrode : E6010 - 2.5-3.2MM

E7010- 2.5-3.2MM

To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/20094860.181083.1617799879540%40mail.yahoo.com.

pgos...@rogers.com

unread,

Apr 9, 2021, 12:19:51 AM4/9/21

to material...@googlegroups.com

Welding consumable testing requirements are always as per ASME Sec II, Pt-C. See the extracts on the testing requirements for E-6010 electrodes. E-7010 electrodes are covered under SFA 5.5. Usually welding qualification codes e.g., Sec-IX deals with welding procedure & performance qualifications only. Welding consumables have to be tested or the Certificate of Conformance is to be issued by consumable manufacturer, not by the fabricator.

Hope this clarifies your query.

Thanks.

Pradip Goswami.P.Eng, IWE.

Independent & Consulting Welding & Metallurgical Specialist

Saudi Aramco Approved Designated Welding Engineer(DPWR)

Linkedin: https://www.linkedin.com/in/pradip-goswami-2999855/

Email:pgos...@rogers.com,pradip....@gmail.com

Cell/Whasapp:1-905-9793232

To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAPv03Fv-jN_dXtQ_%2BwhBcDR-gtFH77_VJTOMmfNxod-t838DTQ%40mail.gmail.com.