Sent with Mailsuite · Unsubscribe |
06/13/24, 02:14:36 PM |
Dear,
According to ASME Section IX, the dimensions of the test coupon plate for mechanical testing depend on the type of test being performed and the thickness of the material. Here is an overview based on the thicknesses you mentioned (6mm, 20mm, and 25mm):
For tensile tests, the standard dimensions for the test coupon are defined in QW-462.1(a) and QW-462.1(b) of ASME Section IX.
Plate Thickness ≤ 8 mm (e.g., 6 mm):
Plate Thickness > 8 mm (e.g., 20 mm and 25 mm):
For bend tests, the dimensions of the test coupons are specified in QW-462.2 of ASME Section IX.
Plate Thickness ≤ 10 mm (e.g., 6 mm):
Plate Thickness > 10 mm (e.g., 20 mm and 25 mm):
For impact testing, the dimensions are given in QW-462.3 of ASME Section IX.
Standard Charpy V-Notch Test Specimens:
Sub-Size Specimens:
6 mm Thickness:
20 mm Thickness:
25 mm Thickness:
It is essential to follow the exact requirements specified in ASME Section IX for the dimensions of test coupons to ensure compliance and the validity of the mechanical tests.
AB
--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-weld...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAD3cn5gWsaVfY6XYLUb2TZhDJtFLwwVuyDyJfrozCYT4TT9%2BAg%40mail.gmail.com.