Characterisation of pipe

[Benaouda Mezrar]

Hi expert 

anyone have procedure for characterisation of pipe API 5L X60 

Such as the test that will be use are 

- tensile test 

- bending test 

- hardness test 

- impact test 

please i need it urgantly 

[abdullah Alhiji]

Hi, You can use the following as guideline: 

1. Tensile Test:

• Cut a sample from the pipe according to ASTM E8/E8M.
• Machine the sample according to the ASTM standard.
• Perform a tensile test on the sample according to the ASTM standard.

2. Bending Test:

• Cut a sample from the pipe according to ASTM A370.
• Machine the sample according to the ASTM standard.
• Perform a bending test on the sample according to the ASTM standard.

3. Hardness Test:

• Cut a sample from the pipe according to ASTM E8/E8M.
• Machine the sample according to the ASTM standard.
• Perform a hardness test on the sample according to the ASTM standard.

4. Impact Test:

• Cut a sample from the pipe according to ASTM E23.
• Machine the sample according to the ASTM standard.
• Perform an impact test on the sample according to the ASTM standard.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-weld...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/5225f762-78b6-4e12-828f-58bbac027fdfn%40googlegroups.com.