Welding process and NDT method for fillet welding

[EmaD FaRaHanI]

Dear all,

Considering we want to weld the inspection box in a water-cooled chimney for a fume hood in a steel plant. The tubes are a nominal diameter of 2 inches, SA210 mild steel (tubing material) with a wall thickness of approximately 0.22”.

1-What welding processes were used to butt weld the tubes to create the inspection opening in the fume hood?

2-would you give me a welding symbol?

3-What NDT method is better for inspection of fillet welds on the inspection box metal casing?

 

Thanks,

 

[Xuân Thông]

Hi sir,

I think it is better if you show the drawing. Our friends can support you easily

Vào Th 5, 8 thg 4, 2021 vào lúc 10:09 EmaD FaRaHanI <emad.f...@gmail.com> đã viết:

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-weld...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CABtwbJFxtqqVK1mSxdvqRU3G%2BWjMnSLft7igf5nX7s7kqF7aZw%40mail.gmail.com.

[EmaD FaRaHanI]

Here is the picture of the inspection box in a chimney.

To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAHTP-OnicZfHDCGfyKikC3%2Bzr5SytMzB47nPoUW6MV_mNPeVVA%40mail.gmail.com.