--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-weld...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/4d8f2d92-d9ee-4ec7-89ca-ebdddd25d516n%40googlegroups.com.
Hi Ali,
The statement in Norsok M-601 is self-explanatory. For double sided welding following the sequencing guidelines specified in the document. While performing single sided welding of clad pipes, the entire girth welding is typically done with alloyed filler metals/ electrodes. Sequences are different than welding a double sided welds.
The attachment explains how the single & double sided welds are performed in cladded pipe.
Thanks.
P.Goswami.P.Eng, IWE.
Independent & Consulting Welding & Metallurgical Specialist
Linkedin: https://www.linkedin.com/in/pradip-goswami-2999855/
Email:pgos...@rogers.com,pradip....@gmail.com
Cell/Whasapp:1-905-9793232
From: Ali Asghari <asghar...@gmail.com>
Sent: November 21, 2020 11:19 PM
To: material...@googlegroups.com
Subject: Re: [MW:31749] Norsok M-601
Dear George.
Thank you for responding, but my question isn't related to your response, actually this statement siad when you have two clad components which want to be welded to each other, first base metal shall be welded and joined ,after that cladded parts.
Now what would be possible for welding of cladded small piping?
Regards,
You received this message because you are subscribed to a topic in the Google Groups "Materials & Welding" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/materials-welding/cHRITpDcpLU/unsubscribe.
To unsubscribe from this group and all its topics, send an email to materials-weld...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAPOi40AuqmjYA5cN4ciu_swJ0i%3DHQ6TFJqPFQ5fOD7Z57XWUUw%40mail.gmail.com.
You received this message because you are subscribed to a topic in the Google Groups "Materials & Welding" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/materials-welding/cHRITpDcpLU/unsubscribe.
To unsubscribe from this group and all its topics, send an email to materials-weld...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAPOi40AuqmjYA5cN4ciu_swJ0i%3DHQ6TFJqPFQ5fOD7Z57XWUUw%40mail.gmail.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CALcH7WD8bbTqFWLiZ_H-0OxUU5H0QbNM7qKsp9ubBDqMLCf0Aw%40mail.gmail.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAFBEtQowRdWOo9-Y_N5Uh-fNzcVu3PnChZZ1N7ivwnG-xODOpA%40mail.gmail.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CALcH7WD8bbTqFWLiZ_H-0OxUU5H0QbNM7qKsp9ubBDqMLCf0Aw%40mail.gmail.com.