A234 WPB & WPBW
Zameer Mohammed
Dear Friends,
As per our specification,
36'' EQ TEE & 36'' x 24'' RED TEE is C.S. A234 GR WPB BW.
The vendor is offering - C.S. A234 GR. WPBW, BW
How can I convince my client that WPBW will confirm to the Chemical Requirement, Tensile Requirement, for WPB.
Thank you,
Regards,
Sabir
Nick
Please refer page No.385 of Sec II Part - A (A234).
WPBW is mandatory Marking on the fittings. So the requirements are met
as per A234.
If there is still problem please reply to this.
Rushabh C. Kapadia
On May 8, 1:27 pm, "Zameer Mohammed" <dreamthinkw...@gmail.com> wrote:
> Dear Friends,
>
> As per our specification,
>
> 36'' EQ TEE & 36'' x 24'' RED TEE is C.S. A234 GR WPB BW.
>
>
> How can I convince my client that *WPBW *will confirm to the Chemical
Zameer Mohammed
Dear Mr. Rushabh,
I understand that in SA 234, for WPB there are two method of construction.
Seamless - WPB
Welded - WPBW
Is it possible to get Fittings above 16'' as Seamless Construction?
I have to procure a 36'' EQUAL TEE and 36'' x 24'' RED TEE. All the vendors are offering Welded Construction, but the Client prefers Seamless. Am I right at the statement that, all fittings above 16'' are Welded Construction only.
AM I RIGHT…..?
Kindly advice me…
Thank you,
Regards,
Sabir