Internal Painting of Oil Tank

[BHARAT GOLE]

Regarding internal painting of oil tank , fixed roof,Code API 650, Design temp. -10/+59 our company specification says "Extend 2 m down from the roof and 1 m up from the bottom."

Now I am not able to conclude whether this includes painting  on bottom plates as well as roof( internal)
regards

Bharat B. Gole

 

---

Date India’s Teen Diva. Find out if you hit it off with her or are her fiery opposite. Drag n’ drop

[Yadav Shiva]

Hi,

     Defenetely if it is a crude/ jet fuel tank you have to Paint the bottom plates as well as roof internal structures. I had done the job,  for coating Bottom plate fiberglas lining, glass flake linning, upto 1 mtr from bottom & for the top up to 2 mtrs.

 

Regards,

Y.C.Shiva,

QA/QC Mechanical Engineer

CSWIP3.1, NACE CIP 2, API 653,

Doha Qatar,

[fmaj...@technip.com]

Dear ,
Tank`s roof in Oil service does not require any painting in general, as the
oil will provide the required protection in floating roof plate and
likewise on fixed roof, however client specification may call for it. If
the stored oil consist H2S then it is advisable to coat the roof plates
too. All depends on the project specification.

The bottom plates shall always be coated becasue heavier liquid which most
of the time consist water shall be present and will also affect the shell
that is why lower portion of the shell is always coated.
Regards







BHARAT GOLE
<bharatgole@hotma
il.com> To
Sent by: material welding
materials-welding <material...@googlegroups.com
@googlegroups.com >
cc

08/05/2009 10:40 Subject
AM [MW:2876] Internal Painting of Oil
Tank

Please respond to
materials-welding
@googlegroups.com

Regarding internal painting of oil tank , fixed roof,Code API 650, Design
temp. -10/+59 our company specification says "Extend 2 m down from the roof
and 1 m up from the bottom."

Now I am not able to conclude whether this includes painting on bottom
plates as well as roof( internal)
regards

Bharat B. Gole

Date India’s Teen Diva. Find out if you hit it off with her or are her
fiery opposite. Drag n’ drop

Save a tree...please don't print this e-mail unless you really need to.







Save a tree...please don't print this e-mail unless you really need to.


This email and any attached files ("Message") may contain confidential and/or privileged information. It is intended solely for the addressee(s). If you receive this Message in error, inform the sender by reply email, delete the Message and destroy any printed copy.
Any unauthorized use, distribution, or copying of this Message or any part thereof is prohibited. Emails are susceptible to alteration. Neither Technip nor any of its affiliates shall be liable for the Message if altered or falsified nor shall they be liable for any damage caused by any virus that might be transmitted with this Message.

[daniel iordache]

Refer to internal tank painting i have a question connected to your subject
.....is necessary to paint internal tank uses for betumen ---temperature +150C

best regards

Daniel

[fmaj...@technip.com]

Bitumen Tank bottom or shell plates will not need any coating from inside.
Best Regards





daniel iordache
<daniel.iordache@
gmail.com> To
Sent by: material...@googlegroups.com
materials-welding cc
@googlegroups.com
Subject
[MW:2886] Re: Internal Painting of
08/05/2009 05:49 Oil Tank
PM