ASME VIII

[Kim]

Dear Sirs,

I am looking for the information about ASME VIII for the pressure
vassel, pulsation dampener & Pressure relief valve. Is ASME VIII have
any relation with 'U' Stamp? Does ASME VIII provide any coding /
certificate?

Thank's in advance.

Best Regards,
Kim

[Srinivasan R.]

Yes asme sec viii div 1 provides information about U stamp


Regards
Srinivasan .R
Valdel engineers & constructors

[Somesh Kumar Pandey]

Kim,

You can refer ASME Sec. VIII Div. 1 Cl. UG-115 through UG-120 for U
Stamp marking and report/ certificate requirement. For Pressure Relief
device you can get the requirements per Cl. UG-125 through UG-137 of
ASME Sec. VIII Div.1.

Regards


Somesh

-----Original Message-----
From: material...@googlegroups.com
[mailto:material...@googlegroups.com] On Behalf Of Kim
Sent: January 30, 2009 5:33 PM
To: Materials & Welding
Cc: shihy...@yahoo.com
Subject: [MW:1482] ASME VIII

This e-mail, including any attached files, may contain confidential and privileged information for the sole use of the intended recipient. Any review, use, distribution, or disclosure by others is strictly prohibited. If you are not the intended recipient (or authorized to receive information for the intended recipient), please contact the sender by reply e-mail and delete all copies of this message.

[Kim Shih Yuen]

Dear Somesh,

 

Thank you for the information.

 

I need some clarification form you. For example, a pulsation dampener is always been design according to ASME VIII, but it won't come with 'U' Stamp inspection & Certificate unless is requested. There will be extra charges for the Stamping. Am I right?

 

Thanks n Regards,

Kim

[Somesh Kumar Pandey]

Kim,

 

Yes, if pulsation dampeners need to be U stamped then, certainly there may be extra charges applicable for the Stamping.

 

Regards

 

Somesh Kumar Pandey

Sr. Engineer- Mechanical

KBR Energy & Chemicals

79 Anson Road #20-01

Singapore 079906

Office: +65 6210 7459

Fax: +65 6210 7250

Email: Somesh...@kbr.com

 

---

<br