welding consumable for 34 CrMoNi6 material
DINESH TIWARI
We have to weld A36 grade material with 34 NiCrMo6 , can anybody tell me which electrode can be used for the same .
If somebody has welding parameters also then please share .
Best Regards ,
-----------------
Dinesh Tiwari
Siegbert Hafenscherer
Hi Dinesh,
This steel is difficult to weld.
Welding consumable: E80T5-B2-MH4 / Welding Alloys product: ROBOFIL B CrMo1 (FCAW)
If you need coated electrodes please refer.
best regards / mit freundlichen Grüßen
Siegbert Hafenscherer, Eng, IWE
Key Industry Manager (Strategic Industries)
Welding Alloys Group
Tel.: +33 389786300
Fax: +33 389786333
Mobil: +49 173 9664991
E-Mail: siegbert.h...@welding-alloys.com
Enclosed please find detail from data sheet from steel V124SC
Welding
Welding presents pro blems.
At any rate, parts should be wel ded in the
quen ched and tem pe red con di ti on.
Strength pro perties of the joint will not in all
ins tan ces come up to the va lu es of the
quen ched and tem pered base me tal.
The fol lo wing re com men da tions should be
followed: Pre he at to 300 - 400°C.
Temper af ter wel ding to about 30 - 50°C be -
low the tem pe ring tem perature re com men -
ded for the steel.
For ad vi ce in con nec ti on with dif ficult weld -
ments, plea se con sult our wel ding en gi -
neers or our Wel ding Tech no lo gy De part -
ment at Kap fen berg works.
--
To post to this group, send email to material...@googlegroups.com
To unsubscribe from this group, send email to materials-weld...@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
muthu barathi
Hi,
this is dissimilar material and now you have to go for welding by using
electrode of ERCuNi GTAW shielding gas Argon 99.99%, backing gas
Argon 99.99%
Dia (mm) 1.6 ¶ 2.0 ¶ 2.4 ¶
Polarity DCEN
Current Range(A) 50-70 ¶ 50-80 ¶ 60-90 ¶
Voltage Range(V) 18-22 ¶ 18-22 ¶ 18-22 ¶
On Sun, 30 Jan 2011 18:17:18 +0530 wrote
--
>
To post to this group, send email to material...@googlegroups.com
>
To unsubscribe from this group, send email to materials-
>
For more options, visit this group's bolg at http://materials-
welding.blogspot.com/
>
The views expressed/exchnaged in this group are members personel views
and meant for educational purposes only, Users must take their own
decisions w.r.t. applicable code/standard/contract documents.
>
Thanking You,
Honesty is the best Policy
With Warm Regards,
Muthu Barathi P
Mobile No:00962788269821 (Jordan)
00962775401951
 |