WPS for Normalize plate and TMCP Plate

[Joanne Wai]

Is there any rules that states that WPS qualified with TMCP plate cannot be used for normalized plate and vice versa?

[Raghuram Bathula]

What is code of construction? is there any impact requirement?

On 26 November 2013 11:43, Joanne Wai <joan...@gmail.com> wrote:

Is there any rules that states that WPS qualified with TMCP plate cannot be used for normalized plate and vice versa?

-

[kzarri...@gmail.com]

Dear Joanni, please see ASME Sec. IX QW-407.

-----Original Message-----
From: Joanne Wai
Sent: 26/11/2013, 09:43
To: material...@googlegroups.com
Subject: [MW:19370] WPS for Normalize plate and TMCP Plate


Is there any rules that states that WPS qualified with TMCP plate cannot be
used for normalized plate and vice versa?

--
To post to this group, send email to material...@googlegroups.com
To unsubscribe from this group, send email to materials-weld...@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm

The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-weld...@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.

[Lab]

Dear Joanne,

 

Please refer to ISO 15608 & ISO 15614. Thermomechanically treated steels are grouped under group no. 2 and normalized steels are under sub group no. 1.3 under group no.1 in ISO 15608. If you have a WPS for welding between steels grouped under 2, ISO 15614 permits welding between the same group of steels or lower (i.e. 2 to 2, 2 to 1, 1 to 2). At the same time, it does not permit welding in the reverse (i.e. WPS for normalized will not be useful for welding of thermomechanically treated steels) as normalized steels are grouped under lower group.

 

Good Luck.

 

Megnath

 

 

----- Original Message -----

From: Joanne Wai

To: material...@googlegroups.com

Sent: Tuesday, November 26, 2013 11:43 AM

Subject: [MW:19370] WPS for Normalize plate and TMCP Plate

Is there any rules that states that WPS qualified with TMCP plate cannot be used for normalized plate and vice versa?

--
To post to this group, send email to material...@googlegroups.com
To unsubscribe from this group, send email to materials-weld...@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-weld...@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.

The information contained in this message are Cochin Shipyard Limited confidential and proprietary information and is intended only for the use of the recipient(s) named above. If the reader of this message is not the intended recipient, he/she is hereby notified that any use, dissemination, distribution, or copying of this communication or any of the content is strictly prohibited. In such case, please advise the sender immediately and delete it from your system. Further acknowledges that any views expressed in the message are those of the individual sender and no binding nature of the message shall be implied or assumed unless the sender does so expressly with due authority of Cochin Shipyard Limited.


----------------------------------
Cochin Shipyard Ltd, Cochin, India

[sachin...@rediffmail.com]

if TMCP plate pass welding procedure then normalised plate will definately pass.However vice versa also it would pass provided no heat treatment is carried out on TMCP plate

-----Original Message-----
From: kzarri...@gmail.com
Sent: 26/11/2013, 4:53 pm
To: material...@googlegroups.com
Subject: RE: [MW:19377] WPS for Normalize plate and TMCP Plate


Dear Joanni, please see ASME Sec. IX QW-407.
-----Original Message-----
From: Joanne Wai
Sent: 26/11/2013, 09:43
To: material...@googlegroups.com