welding & base metal hardness requirement for SA 387 Gr.5 Class II plate welding with E8018-B6

[sevak hiren]

Dear Experts,

 

Can anyone provide welding & base metal hardness requirement for SA 387 Gr.5 Class II plate welding with E8018-B6.

 

Thanks & Regards

[LALIT VADADORIYA]

DEAR HIREN,

 

A 387 Class 1 Class 2 SHEETS / PLATES
ASTM	Grade	Chemical Requirements Percent (%)										Mechanical Requirements
		C max	Mn	P	S	Si	Ni	Cr.	Mo	Cu	Others	Tensile Strength		Yield Strength		Elong mini	Hardness
			Max	Max	Max	Max						Mini-MPa (Ksi)		Mini-MPa(Ksi)
																%	Brinell	Rockwell
A 387 Class 1 Class 2												Class 1	Class 2	Class 1	Class 2
	2	0.05-0.021	0.55-0.80	0.035	0.04	0.15-0.40		0.50-0.80	0.45-0.60			380-550	486-620	230	310	22	Max201HB	Max92HRB
	5	0.15	0.30-0.60	0.04	0.03	0.5		4.00-6.00	0.45-0.65			415-585	515-690	205	310	18	max202HB	Max92HRB
	7	0.15	0.30-0.60	0.03	0.03	1		6.00-8.00	0.45-0.65			415-585	515-690	205	310	18	max217HB	Max95HRB
	9	0.15	0.30-0.60	0.03	0.03	1		8.00-10.0	0.90-1.10			415-585	515-690	205	310	18	max217HB	Max95HRB
	11	0.04-0.17	0.40-0.65	0.035	0.04	0.50-0.80		1.00-1.50	0.45-0.65			415-585	515-690	240	310	22	max217HB	Max95HRB
	12	0.04-0.17	0.40-0.65	0.035	0.04	0.15-0.40		0.80-1.15	0.45-0.60			380-550	450-585	230	275	22	max217HB	Max95HRB
	21	0.04-0.17	0.30-0.60	0.035	0.035	0.5		2.75-3.25	0.90-1.10			415-585	515-690	205	310	18	max201HB	Max92HRB
	22	0.05-0.17	0.30-0.60	0.035	0.035	0.5		2.00-2.50	0.90-1.10			415-585	515-690	205	310	18	max201HB	Max92HRB

--

Regards

Lalit Vadadoriya
Sr.Engineer (Inspection)
Engineers India Limited
Dahej Petrochemical Complex,

Dahej (Gujarat)

--
To post to this group, send email to material...@googlegroups.com
To unsubscribe from this group, send email to materials-weld...@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

[CHINTUKUMAR GANDHI]

Dear Mr. Hiren,   As per Table 331.1.1 OF ASME B31.3, Max. Hardness 241 BHN.   B. R.     C. R. GANDHI --- On Sat, 7/21/12, sevak hiren <hirens...@gmail.com> wrote:

[Prakash Hegde]

Hi! Generaly for this grade of Steel 235 BHN max is recomended for weld , HAZ ,After PWHT and base material generaly you get 200BHN max   Regards   Hegde

--- On Sat, 21/7/12, sevak hiren <hirens...@gmail.com> wrote:

From: sevak hiren <hirens...@gmail.com> Subject: [MW:14916] welding & base metal hardness requirement for SA 387 Gr.5 Class II plate welding with E8018-B6 To: material...@googlegroups.com

[atish...@gmail.com]

Sent from my iPod

--