pup piece in every 1 km
215 views
Skip to first unread message
limesh M
May 12, 2011, 3:02:32 AM5/12/11
to Materials & Welding
Dear All,
Why some client specification requires 6 m pipe pup piece in every 1 km pipeline?
Regards,
Limesh
SOHAIB GHNAIMAT
May 12, 2011, 2:45:20 PM5/12/11
to material...@googlegroups.com
This is required during scraping the pipeline by the inspection instrument scraper / Calliper Run.
Regards,
Sohaib
From: limesh M <lime...@gmail.com>
To: Materials & Welding <material...@googlegroups.com>
Sent: Thu, May 12, 2011 8:02:32 AM
Subject: [MW:11038] pup piece in every 1 km
--
To post to this group, send email to material...@googlegroups.com
To unsubscribe from this group, send email to materials-weld...@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
To post to this group, send email to material...@googlegroups.com
To unsubscribe from this group, send email to materials-weld...@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
lakshman kumar
May 12, 2011, 11:46:09 PM5/12/11
to material...@googlegroups.com
Dear all,
6mtr is the minimum length requirement for the pup piece,
But using 6 mtr pup piece in every 1 KM of pipe line is not a requirement (or mandatory), and any client will not recommend also ( As per my previous experience)
Request you verify / provide the spec of the client if available.
Thanks & Regards
Lakshman kumar.B |
Manager - QA/QC | LANCO INFRATECH LIMITED
Plot# 1255 |
Sanjeevani Chowk | Mahanadi Vihar |
Cuttack 753004
Phone : + 91-671-2445033| Mobile: +91 9937286851 | www.lancogroup.com
Go Green |The future will thank you: Lakshma...@lancogroup.com, Lakshma...@gmail.com
--
chanockin
May 13, 2011, 6:09:21 PM5/13/11
to Materials & Welding
hi limesh,
In Mexico the subsea pipelines is for the divers inspection, mfl
ispection, etc. and the lenght is due to the standard pipe´s lenght
(40') you just have to cut the pipe in the half, and then you have a
double joint.
the NRF-013-Pemex-2005 says:
Carrete de monitoreo.- Tramo de tubería con una junta de fabrica en su
parte central y que sirve para
identificar las lecturas de los diablos instrumentados.
"pup monitoring .- Section of pipe with a girth weld made in its
central part and serves to
identify pigs instrumented readings."
best regards.
In Mexico the subsea pipelines is for the divers inspection, mfl
ispection, etc. and the lenght is due to the standard pipe´s lenght
(40') you just have to cut the pipe in the half, and then you have a
double joint.
the NRF-013-Pemex-2005 says:
Carrete de monitoreo.- Tramo de tubería con una junta de fabrica en su
parte central y que sirve para
identificar las lecturas de los diablos instrumentados.
"pup monitoring .- Section of pipe with a girth weld made in its
central part and serves to
identify pigs instrumented readings."
best regards.
Reply all
Reply to author
Forward
0 new messages