WQT Specimen Dimension

[Mask Man]

Hai Experts,

      Please clarify the Welder Qualification Test Specimen Dimension as per ASME.  I used for pipe 150X150 and for plate 300X300 but where this details provide in the ASME? please clarify.

Regards,

Mask

[Vidhyapathi]

You need the weld min 6" for WQT

so if weld plate 150 mm length enough, 

If Pipe 2 " cover the WQT 

ASME SEX IX QW304 have this Information 

Regards, 

Vidhyapathi 

--
To post to this group, send email to material...@googlegroups.com
To unsubscribe from this group, send email to materials-weld...@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-weld...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[george....@gr.bureauveritas.com]

Look in ASME ΙΧ PART WELDING DATA AT THE END WHERE THERE IS SEVER FIGURES

best regards

Dr. Georgios Dilintas

Authorized Nuclear Inspector
Authorized Inspector Supervisor
API 510 Inspector

I&F REGIONAL TECHNICAL MANAGER
BUREAU VERITAS HELLAS

Tel: +30 210 40 63 113/4
Fax: +30 210 40 63 118
Cell: +30 69 44 64 62 04
(See attached file: Dilintas_George.vcf)

Mask Man ---16/03/2014 10:04:16---Hai Experts,       Please clarify the Welder Qualification Test Specimen Dimension as

--

To post to this group, send email to material...@googlegroups.com
To unsubscribe from this group, send email to materials-weld...@googlegroups.com
For more options, visit this group's bolg at

http://materials-welding.blogspot.com/

http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm

The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-weld...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

This message contains confidential information. To know more, please click on the following link: http://disclaimer.bureauveritas.com

[Mohit Aggarwal]

As per article 3rd in ASME you should have 150 mm length of weld should be defect free generally use coupons of 150*300*thk so that if 150mm length is found defective than other 150 mm can be interpreted as a defect free. See clause 302. 2

--