ASME/ASTM equivalent of S355J2+N

[Vikas Bhandari]

Dear All

What is the ASTM/ASME equivalent of structural material S355J2+N (minimum yield strength 355 MPa, Tensile 470 to 630 MPa, C: 0.20 max, Si: 0.55 max, Mn: 1.60 max , CE: 0.45 max). A link to reference document stating the same would be much appreciated.

Thanks & best regards

[Kathalingam Babu]

ABS Grade EH36

Also, ASTM A131 Gr.EH36

 

Thanks & Regards,

 

K. Babu
----- Original Message -----

--
To post to this group, send email to material...@googlegroups.com
To unsubscribe from this group, send email to materials-weld...@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

[Elshan Feyzullayev]

A516 Gr70 is ok to substitute.
 

---

From: kathalin...@ppl.com.sg
To: material...@googlegroups.com
Subject: Re: [MW:10856] ASME/ASTM equivalent of S355J2+N
Date: Tue, 26 Apr 2011 16:24:40 +0800

[Cheril Rajeev]

Equillent material for S355JR+N  is ASTM A 572. But Y.S (345) and T.S is lesser than S355JR.

 

Regards

Cheril

--

[SENTHILKUMAR SWAMINATHAN]

Vikas,

Refer attached may help you. Hope it is A36 (ASTM)
 

Regards,
S.SENTHILKUMAR

---

From: Vikas Bhandari <vikas.bh...@gmail.com>
To: material...@googlegroups.com
Sent: Tue, 26 April, 2011 9:09:50 AM

Subject: [MW:10855] ASME/ASTM equivalent of S355J2+N

Dear All

What is the ASTM/ASME equivalent of structural material S355J2+N (minimum yield strength 355 MPa, Tensile 470 to 630 MPa, C: 0.20 max, Si: 0.55 max, Mn: 1.60 max , CE: 0.45 max). A link to reference document stating the same would be much appreciated.

Thanks & best regards

--

[Kathalingam Babu]

Senthil

 

A36 doesn't have any Impact requirement, But S355K2+N is need an CVN@-40 deg cel.

 

Thanks & Regards,

 

K. Babu

----- Original Message -----

From: SENTHILKUMAR SWAMINATHAN

To: material...@googlegroups.com

[Kathalingam Babu]

Sorry , CVN @-20 deg.cel

 

Thanks & Regards,

 

K. Babu

----- Original Message -----

From: SENTHILKUMAR SWAMINATHAN

To: material...@googlegroups.com

Sent: Tuesday, April 26, 2011 8:44 PM

Subject: Re: [MW:10863] ASME/ASTM equivalent of S355J2+N

[Arunachalam A]

It is NOT ASTM A36. A36 has specified tensile of 420 N/mm2.

--

Arunachalam.A,

Abu Dhabi Gas Industries Ltd,

P.O.Box # 50124

Abu Dhabi, UAE

Mobile : +971-50-5257122

[Muhamad Zuhdey Sharifudin]

S355j2+N is normalized supply condition material have impact cvn -40 deg..

ASTM A36 is as rolled material w/o any impact req

Arunachalam A <arun...@gmail.com> Sent by: material...@googlegroups.com 04/27/2011 02:13 AM Please respond to material...@googlegroups.com

To material...@googlegroups.com cc Subject Re: [MW:10867] ASME/ASTM equivalent of S355J2+N

[Mrityunjay Kumar / ZS Saudi PEB QA/QC]

Dear Vikas,

The ASTM/ASME equivalent of structural material S355J2+N is ASTM A572 Gr-50

 

Best Regards,

M.K.Choudhary

P.O. Box 877,  Dammam  31421  KSA

Phone  : (+9663) 8471840 X 555

Fax       : (+9663) 8471291

www.zamilsteel.com

 

From: material...@googlegroups.com [mailto:material...@googlegroups.com] On Behalf Of Arunachalam A
Sent: Tuesday, April 26, 2011 9:14 PM
To: material...@googlegroups.com
Subject: Re: [MW:10867] ASME/ASTM equivalent of S355J2+N

 

It is NOT ASTM A36. A36 has specified tensile of 420 N/mm2.

-------------------------------------------------------------------------------------------------------- Disclaimer: This email and any files transmitted with it are confidential and intended solely for the use of the addressee(s) named herein. If you are not the intended recipient or addressee, you should not use, disseminate, distribute, copy or alter this email. Any views or opinions presented in this email are solely those of the author and might not represent those of "Zamil Industrial" and or its units. Warning: Although reasonable precautions have been taken to ensure no viruses are present in this email, the company cannot accept responsibility for any loss or damage arising from the use of this email or attachments. If you have received this electronic mail message in error, please contact the sender directly.

[Plate Steel]

S355J2+N under EN 10025-2 need Normalized plus low temperature impacting test under -20 centigrade.

So If using ASTM A572Gr50,you have to ask additional techincals requirements (Normalized heat treatment,-20 Centigrade low temperature impacting test),then this A572Gr50 steel shall be equal to S355J2+N.

Also,ship plates A131 Grade DH36 and A131 Grade EH36 is also equal to S355J2+N and even better than S355J2+N.

Hope this would be useful to you.

Eric from Xinsteel Industrial Co.,Limited

在 2011年4月26日星期二 UTC+8下午4:09:50，vikas写道：