WPS Qualification as per QW-451.
162 views
Skip to first unread message
Patel Vivek
Jul 10, 2018, 9:18:20 AM7/10/18
to Materials & Welding
Background : PQR qualified on coupon : 10.97 mm
WPS Qualified : 10.97- 21.94 mm(impact)
As per QW-451, WPS qualified up to 21.94 mm. Can we used that WPS for 24.00 mm Thickness. grove weld by considering Qw-403.3, : increase in 20 % in base metal thickness when the test coupon thickness is less than or equal to 25 mm.
Regards,
Vivek Patel
Con. :- +966-0550985053
E-mail ID : vivekpa...@gmail.com
Kannayeram Gnanapandithan
Jul 10, 2018, 9:39:05 AM7/10/18
to materials-welding
What is the welding process
--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-weld...@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.
Patel Vivek
Jul 10, 2018, 9:41:48 AM7/10/18
to venkat_...@yahoo.co.in, material...@googlegroups.com
In code it's given for EBW...
my process is GTAW+SMAW...
On Tue, Jul 10, 2018, 4:39 PM venkat chikkala <venkat_...@yahoo.co.in> wrote:
Witch process.
--
venkat chikkala
Jul 10, 2018, 10:29:37 PM7/10/18
to material...@googlegroups.com, Patel Vivek, material...@googlegroups.com
Dear,
Variables mentioned in table are applicable to specific process only.
Same shall not be applied to other process.
In your case same is not applicable. Need to qualify WPS.
Regards,
CH V RAMANA
BVIL
On Tue, 10 Jul 2018 at 7:11 p.m., Patel Vivek<vivekpa...@gmail.com> wrote:
Kannayeram Gnanapandithan
Jul 10, 2018, 10:29:41 PM7/10/18
to materials-welding
For your process , QW 403.3 is not applicable. U follow the variables against each process.
Reply all
Reply to author
Forward
0 new messages