--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/3b99f624-8c97-4143-8a84-82ff9352252c%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
Ing. José Juan Jiménez Alejandro
Cel. 812 103 1155
Skype: jjjimeneza
I suppose you built your WPS on ASME IX ; ER316L have Mo greater than ER308L which increase pitting corrosion resistance , contain also NI greater than ER308l which increase toughness.
In ASME IX change of welding electrode is essential variable but ER308L and ER316L have the same “F” number so you can make another WPS on the same PQR of ER308L.
To cover your issue and take your client approved before, if he refused respect your “WPS” and C/O wrong welded joint.
From: material...@googlegroups.com [mailto:material...@googlegroups.com] On Behalf Of José Juan Jiménez Alejandro
Sent: Wednesday, December 14, 2016 4:09 PM
To: material...@googlegroups.com
Subject: Re: [MW:25820] Using ER316L instead of ER308L to weld 304L to 304L
The WPS is made with ASME IX ?, I think one of the main data that should be placed in your question is the building code, so that the experts who see this email can help you, if you give incomplete information it is more difficult to help you .
2016-12-14 5:02 GMT-06:00 44897 <malgire...@gmail.com>:
Dear experts,
we have situation is here one of our welder selected wrong filler material,
To weld 304L to 304L as per wps it was selected ER308L.
One of our welder welded with ER316L we have found this after completion of weld in the PMI results where MO content is showing 2.0%.
Is that acceptable to weld higher grade electrode for 304L piping.
Regards
Reddy.M
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-weld...@googlegroups.com.
To post to this group, send email to material...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/3b99f624-8c97-4143-8a84-82ff9352252c%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
--
Ing. José Juan Jiménez Alejandro
Cel. 812 103 1155
Skype: jjjimeneza
--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-weld...@googlegroups.com.
To post to this group, send email to material...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAO5ZurJt%2B-kS-Z4QiZzsRf57WVJGX9wjSVF0%2B6Q%3D4dcT6mRSwg%40mail.gmail.com.
The WPS is made with ASME IX ?, I think one of the main data that should be placed in your question is the building code, so that the experts who see this email can help you, if you give incomplete information it is more difficult to help you .
2016-12-14 5:02 GMT-06:00 44897 <malgire...@gmail.com>:
Dear experts,we have situation is here one of our welder selected wrong filler material,To weld 304L to 304L as per wps it was selected ER308L.One of our welder welded with ER316L we have found this after completion of weld in the PMI results where MO content is showing 2.0%.Is that acceptable to weld higher grade electrode for 304L piping.RegardsReddy.M
--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-weld...@googlegroups.com.
To post to this group, send email to material...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/3b99f624-8c97-4143-8a84-82ff9352252c%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
On Wed, 14 Dec, 2016 at 3:43 pm, 44897<malgire...@gmail.com> wrote:
--
Normally, it is an acceptable practice to use er 316 filler wire to weld 304 base metals.
On Wed, 14 Dec, 2016 at 3:43 pm, 44897<malgire...@gmail.com> wrote:
Dear experts,--we have situation is here one of our welder selected wrong filler material,To weld 304L to 304L as per wps it was selected ER308L.One of our welder welded with ER316L we have found this after completion of weld in the PMI results where MO content is showing 2.0%.Is that acceptable to weld higher grade electrode for 304L piping.RegardsReddy.M
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/3b99f624-8c97-4143-8a84-82ff9352252c%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/546069606.712085.1481953691801%40mail.yahoo.com.To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/ msgid/materials-welding/ 546069606.712085. 1481953691801%40mail.yahoo.com .