DIN Dimensional Code like ASME

[Bagesh]

Dear All,

         I have struck up for a project of Munich, Would like to get the dimensional code No. Like ASME B16.9 of Wrought Fittings, ASME B16.5 for Flanges, similarly DIN also should have the standard related to the dimensional correctness.

The Material is SS316 Ti, from DIN EN 1.4571

Can I get these Dimensional Standards name, which may be but not limited to ASME equivalent. I need these dimensional standards for Pipes, Fittings (Forged and Wrought SW and BW), Flanges(WN and SW) (Olets if any) etc. I tried to get through Internet, but it seems they are quite confusing there.

Thanking you all in Advance and will appreciate for this help.

 

===================

Bagesh Kumar

Seoul 135985

===================

 

 

[Karthik]

hi, 01.Dimensions and Weights for medium weight pipes to DIN 2440 and heavy weight pipes to DIN 2441 o2. *DIN 2527 Blind flanges *DIN 2573, DIN 2576 Flat flange for welding (slip on) *DIN 2575 Flat flange for welding (slip on) *DIN 2630, DIN 2631, DIN 2632, DIN 2633, DIN 2634, DIN 2635, DIN 2636, DIN 2637 Welding neck flanges (1-160 bar) *DIN 2673 Loose flanges and rings for welding (slip-on flanges and plain collars) *DIN 2652, DIN 2653, DIN 2655, DIN 2656 Loose flanges and rings for welding (slip-on flanges and plain collars) *DIN 2641, DIN 2642 Lapped (lap joint) flanges Plain collars DIN 2565, DIN 2566, DIN 2567, DIN 2568, DIN 2569 BSPT Threaded flanges with neck DIN 2627, DIN 2628, DIN 2629, DIN 2638 Welding neck flanges (160-400 bar) DIN 28115 Long neck welding flanges DIN 2558 Oval plain threaded flanges, DIN 2561 Oval flanges, with neck threaded DIN 86029, DIN 86030 Hubbed slip-on flanges for welding DIN 2502 and DIN 2503 Flat flange for welding (slip on) DIN 2512, DIN 2513, DIN 2514, DIN 2519, DIN 2526, DIN 2559 - Flange design standards Flanges, tongue and groove joint faces. Rated pressure from 10 to 160. Design sizes. DIN 2512 Flanges, male and female joint faces. Rated pressure from 10 to 100. DIN 2513 Flanges, groove for rubber seal ring. Rated pressure from 10 to 40. Design sizes. DIN 2514 Steel flanges: Technical terms of delivery. DIN 2519 Flanges: Joint face shape. DIN 2526 Flanges: Welding ends of the neck. DIN 2559 DIN 2501 - Flange dimensions and drilling: summary (weld neck) DIN 2526 Form C (UNI 2229-67) Raised face dimensions DIN Flange Bolting Specifications Flange gasket dimensions per DIN 2690, DIN 2691, DIN 2692, DIN 86071 & DIN 86072 DIN EN 1092-1 flange summary page DIN flange summary chart Description Rated Pressure / Presión Nominal / Nenndruck (in bar) (1 bar = 14.5 psi)   1 2.5 6 10 16 25 40 64 100 160 250 320 400   DIN Blind Flanges     2527 2527 2527 2527 2527 2527 2527         Flat flange for welding (slip-on)     2573 2576                   Welding neck flanges 2630 2630 2631 2632 2633 2634 2635 2636 2637 2638 2628 2629 2627 Lapped flanges, Plain collars     2641 2642                   Loose flanges and rings for welding     2652 2653   2655 2656             Loose flanges and rings with neck for welding       2673                   Oval plain threaded flanges     2558                     Oval flanges, with neck threaded       2561 2561                 Threaded flanges with neck     2565 2566 2566 2567 2567 2568 2569         Long neck welding flanges           28115   28115               Hubbed slip-on flanges for welding     86029 86030                 you try the following ..useful to you. http://mdmetric.com/home3.htm Thanks & Regards, (Karthik) Karthikeyan.S QA/QC Manager Getabec Energy Co.,Ltd. 379,Moo6,Soi8,Nikhomphatana, Rayong-21180, Thailand. Phone: 0066 38 897035-8 (Off) Fax: 0066 38 897034 Hand Phone: 0066 892512282 --- On Wed, 12/8/10, Bagesh <bages...@gmail.com> wrote:

From: Bagesh <bages...@gmail.com> Subject: [MW:0] DIN Dimensional Code like ASME To: material...@googlegroups.com Cc: piping...@yahoogroups.com Date: Wednesday, December 8, 2010, 1:56 PM

Dear All,          I have struck up for a project of Munich , Would like to get the dimensional code No. Like ASME B16.9 of Wrought Fittings, ASME B16.5 for Flanges, similarly DIN also should have the standard related to the dimensional correctness.

-- To post to this group, send email to material...@googlegroups.com To unsubscribe from this group, send email to materials-weld...@googlegroups.com For more options, visit this group's bolg at http://materials-welding.blogspot.com/ The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.