WELD PLAN REQUIREMENT

[JAY]

Dear team,

I would like to know some information/suggestion/knowledge to prepare weld plan,

Points are mentioned below

1. Is it mandatory to mention each and every weld joints in weld plane i.e welding of Lug support, name plates , hooks insulation rings etc.

2. What content should be mentioned in weld plan.( pl find attached formate that i have) , if there is any formate for weld plan then please provide us so i can revise it as per requirement.

THANKS IN ADVANCE..

   

[Ramesh]

Hi

 

Each organization will have their own format based on their own quality requirements.

 

Some may call weld register, weld table, weld descriptions, weld summary plan etc. etc..

 

The points is wherever welding is involved, it should be indicated & supported with qualified WPS/PQR as minimum, NDT requirements / Welder identifications may be added if required.

 

All Pressure parts and Non Pressure parts / attachments, including repairs, buttering, Fillets, dissimilar weld etc.…shall be included in your weld plan.

 

You may check with your quality team / procedure of your organization and previous project reference if any, how the weld plan is finally approved ! 

Thanks and Regards

Rameshkannan Devaraj

"What you have learned is a mere handful; What you haven't learned is the size of the world – Avvaiyar"

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.

[Dinesh Somwanshi]

Pls refer ISo3834 for more details.

Thanking You,

With Regards..
Dinesh V Somwanshi
Api 570, Cswip 3.1,Bgas 2
Authorised Certified Piping, Welding, Painting Inspector.
00919881344135

--

[Souravbohray]

its enough i have same weld plan format using for u stamp jobs ur format have all required information.format is depend upto organisation to organisation but it should have all neccessary information and u have already mention the desire information.it is acceptable.ok