FW: 5353] PWHT requirement as per EN 13480
pgoswami
Rahul,
I have attached the extract from EN-13840-4,on PWHT with the explanatory notes. EN specifications though brief, are very systematic. If you look at the notes and highlighted areas, it explains the minimum thickness requirement for PWHT, including holding time and temperature.
Let me know if it works for you.
Thanks.
Subject: [MW:5353]
PWHT requirement as per EN 13480
Date: Wed, 2 Jun 2010 14:13:10
+0200
From: Rahul...@akzonobel.com
To:
material...@googlegroups.com
Hello
All,
In
EN 13480, part 4, PWHT requirement for all material group is defined as per
Table 9.14.1-1 & 9.141-2.
As per this table
there is no minimum thickness requirement defined for PWHT requirement. In these
table PWHT parameters, i.e. Temperature & Holding time , are defined for
Controlling thickness above 0 mm.
( unlike, ASME
B31.3 ,where we need to have a PWHT for carbon steel material above 19 mm &
for CrMo steel with thickness 13 mm & above ).
But in related para.
9.14.1, NOTE -1 states that, PWHT may be required on steels with lower
thickness than specified in these table.
Can anybody explain
me where , in EN 13480, I can find the minimum thickness of a
particular material which does not require PWHT ?
Kind
regards
Rahul
--
To
post to this group, send email to material...@googlegroups.com
To
unsubscribe from this group, send email to
materials-weld...@googlegroups.com
For more options, visit this
group's bolg at http://materials-welding.blogspot.com/
The
views expressed/exchnaged in this group are members personel views and meant for
educational purposes only, Users must take their own decisions w.r.t. applicable
code/standard/contract documents.
THIS MESSAGE IS ONLY INTENDED FOR THE USE OF THE INTENDED RECIPIENT(S) AND MAY CONTAIN INFORMATION THAT IS PRIVILEGED, PROPRIETARY AND/OR CONFIDENTIAL. If you are not the intended recipient, you are hereby notified that any review, retransmission, dissemination, distribution, copying, conversion to hard copy or other use of this communication is strictly prohibited. If you are not the intended recipient and have received this message in error, please notify me by return e-mail and delete this message from your system. Ontario Power Generation Inc.